Table of Contents
Advertisement
114
C H A P T E R F O U R T E E N
Radio Interference (For 220-240 V Model Only)
This apparatus complies with EN55022/Class B and EN55024.
For Your Safety
To ensure safe operation the three-pin plug supplied must be inserted
only into a standard three-pin power point which is effectively grounded
through the normal household wiring.
Extension cords used with the equipment must be three-conductor and be
correctly wired to provide connection to ground.
The fact that the equipment operates satisfactorily does not imply that
the power is grounded and that the installation is completely safe. For
your safety, if in any doubt about the effective grounding of the power,
consult a qualified electrician.
IEC 825 Laser Class
CLASS 1 LASER PRODUCT.
Disconnect device
The equipment must be installed near the socket outlet which must be
easily accessible.
IMPORTANT
If the socket outlet is not compatible with the mains plug as fitted, then
remove the plug from the mains cord and fit an appropriate three pin
plug. If the replacement plug is intended to take a fuse then fit the same
fuse as the original.
If a moulded plug is severed from the power cord then it should be
destroyed because a plug with cut wires is dangerous if plugged into a
live socket outlet. Do not leave it where a child might find it.
In the event of replacing the plug fuse, fit a fuse approved by ASTA to
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug with the cover omitted.
WARNING - THIS PRINTER MUST BE PROPERLY EARTHED.
The wires in the supplied mains cord are the following colours:
Green and yellow: Ground
Blue:
Brown:
Neutral
Live
Advertisement
Table of Contents
