Initial Getting Started; Setup Setting The Dialling Mode (Tone/Pulse); Setting The Date And Time - Brother MFC-9870 Owner's Manual

4
C H A P T E R
Initial
Setup
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your MFC is initially set to TONE. If you are using a PULSE dial line,
you can change the setting to PULSE by following the steps below.
1
2
3
4

Setting the Date and Time

Your MFC displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the MFC maintains date and time
information for several hours. All other settings remain unaffected.
1
F O U R
Press Menu, 1, 1, 1. The screen prompts you to select TONE or
PULSE.
DIALLING:TONE
SELECT { } & SET
DIALLING:PULSE
SELECT { } & SET
Use or to select the dialling mode.
Press Set when the screen displays the dialling mode you want.
Press Stop to exit.
Press Menu, 1, 1, 2. The screen prompts you to enter the year.
YEAR:XX
ENTER & SET
25