Printing On Envelops, Thicker Paper And Card Stock - Brother MFC-9870 Owner's Manual

U S I N G T H E M A C H I N E A S A P R I N T E R

Printing on Envelops, Thicker Paper and Card Stock

When the rear cover is lifted up, the machine has a straight paper path
from the manual feed slot to the rear of the printer. Use this paper feed
and output method when you want to print on thicker paper or card
stock.
1
Lift up the rear cover at the rear of the machine.
2
Adjust the manual feed paper guides to the width of the paper you're
using.
3
Insert a single sheet of paper into the manual feed slot until the front
edge touches the paper feed rollers. Let go of the paper as the
machine pulls it into position.
4
Select manual feed mode in the printer driver.
5
Send the print data as usual.
6
After the machine ejects the printed page, return to Step 3 to insert
the next sheet of paper. The machine will wait until you insert the
next sheet of paper. Repeat for each page to be printed.
7
When you have finished printing, close the rear cover of the
machine.
To prevent the possibility of transparencies smudging as they stack in the
output bin, remove each transparency after it exits.
103