Download  Print this page

Brother 1920CN - Color Inkjet - Fax Service Manual

Multi-function center.
Hide thumbs

Advertisement

MULTI-FUNCTION CENTER

SERVICE MANUAL

MODEL: MFC9600/MFC9850/MFC9870
DCP1200/MFC9750

Advertisement

Table of Contents

   Related Manuals for Brother 1920CN - Color Inkjet - Fax

   Summary of Contents for Brother 1920CN - Color Inkjet - Fax

  • Page 1: Service Manual

    MULTI-FUNCTION CENTER SERVICE MANUAL MODEL: MFC9600/MFC9850/MFC9870 DCP1200/MFC9750...
  • Page 2 © Copyright Brother 2000 All rights reserved. No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. Specifications are subject to change without notice. All products and company names mentioned in this manual are trademarks or registered trademarks of their respective holders.
  • Page 3 PREFACE This publication is a Service Manual covering the specifications, construction, theory of operation, and maintenance of the Brother machine. It includes information required for field troubleshooting and repair--disassembly, reassembly, and lubrication--so that service personnel will be able to understand machine function, to rapidly repair the machine and order any necessary spare parts. To perform appropriate maintenance so that the machine is always in best condition for the customer, the service personnel must adequately understand and apply this manual.
  • Page 4: Safety Information

    SAFETY INFORMATION Laser Safety (110-120V Model only) This printer is certified as a Class 1 laser product under the US Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within the protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
  • Page 5 CHAPTER I. GENERAL DESCRIPTION...
  • Page 6: General Description

    CHAPTER I. GENERAL DESCRIPTION CONTENTS MACHINE OUTLINE..................... I-1 1.1 External Appearance and Weight ..............I-1 1.2 Components ....................I-1 SPECIFICATIONS ....................I-2...
  • Page 7: Machine Outline

    MACHINE OUTLINE External Appearance and Weight The figure below shows the machine appearance and approximate dimensions. Weight: Machine proper 15.2 kg Machine (incl. drum unit & toner cartridge) 17.0 kg In package 21.2 kg Components The machine consists of the following major components: I - 1...
  • Page 8: Specifications

    SPECIFICATIONS (1/6) Machine Type Multi-Function Center w/ Fax Multi-Function Center w/o Fax Model MFC9600 DCP1200 GENERAL Print Engine Laser (ZL) Laser (ZL) Modem Speed (bps) 14,400 (Fax) Transmission Speed (sec.) ITU-T Group Coding System MH/MR/MMR/JBIG Input/Output Width FB: 8.5" x 11" FB: 8.5"...
  • Page 9 (1/6) Machine Type Multi-Function Center w/ Fax Multi-Function Center w/ Fax Model MFC9870 MFC9850 GENERAL Print Engine Laser (ZL) Laser (ZL) Modem Speed (bps) 14,400 (Fax) 14,400 (Fax) Transmission Speed (sec.) ITU-T Group Coding System MH/MR/MMR/JBIG MH/MR/MMR/JBIG Input/Output Width FB: 8.5" x 11" FB: 8.5"...
  • Page 10 (1/6) Machine Type Multi-Function Center w/o Fax Model MFC9750 GENERAL Print Engine Laser (ZL) Modem Speed (bps) Transmission Speed (sec.) ITU-T Group Coding System Input/Output Width FB: 8.5" x 11" ADF: 5.8" to 8.5"/2.75" to 8.5" ADF (pages) Up to 50 16 chars x 2 lines On-Screen Programming Backup Clock...
  • Page 11 (2/6) Machine Type Multi-Function Center w/ Fax Multi-Function Center w/o Fax Model MFC9600 DCP1200 Chain Dialing Caller ID Call Waiting Caller ID Distinctive Ringing Hold/Mute Key Power Failure Dialing Speaker Volume Yes (3 steps + OFF) Ringer Volume Yes (3 steps + OFF) Handset Volume PBX Feature Transfer Method...
  • Page 12 (2/6) Machine Type Multi-Function Center w/ Fax Multi-Function Center w/ Fax Model MFC9870 MFC9850 Chain Dialing Caller ID Call Waiting Caller ID Distinctive Ringing Yes (U.K. DEN) Yes (U.K. DEN) Hold/Mute Key Power Failure Dialing Speaker Volume Yes (3 steps + OFF) Yes (3 steps + OFF) Ringer Volume Yes (3 steps + OFF)
  • Page 13 (2/6) Machine Type Multi- Function Center w/o Fax Model MFC9750 Chain Dialing Caller ID Call Waiting Caller ID Distinctive Ringing Hold/Mute Key Power Failure Dialing Speaker Volume Ringer Volume Handset Volume PBX Feature Transfer Method Internet FAX Data Modem Easy Receive/Fax Detect Fax/Tel Switch Super Fine 300 dpi Transmission...
  • Page 14 (3/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/o Fax Model MFC9600 DCP1200 Group Dial Yes (6) Error Re-Transmission Station ID 1 (20 digits/20 chars) Off-Hook Alarm Remote Maintenance Call Reservation Over Manual TX RX Mode Indication Resolution Indication Memory Security Color FAX...
  • Page 15 (3/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/ Fax Model MFC9870 MFC9850 Group Dial Yes (6) Yes (6) Error Re-Transmission Station ID 1 (20 digits/20 chars) 1 (20 digits/20 chars) Off-Hook Alarm Remote Maintenance Call Reservation Over Manual TX RX Mode Indication Resolution Indication Memory Security...
  • Page 16 (3/6) Machine Type Multi- Function Center w/o Fax Model MFC9750 Group Dial Error Re-Transmission Station ID Off-Hook Alarm Remote Maintenance Call Reservation Over Manual TX RX Mode Indication Resolution Indication Memory Security Color FAX Manual Broadcasting LCD Language OPEN LCR E-MAIL FAX LIST/REPORT Activity Report/Journal Report...
  • Page 17 (4/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/o Fax Model MFC9600 DCP1200 Emulation PCL4 PCL4 Resident Fonts 24 bitmap (PCL4 Comp.) 24 bitmap (PCL4 Comp.) Fonts Disk Based Yes (35 TrueType) Yes (35 TrueType) Paper Handling Size LTR, LGL, A4, B5, A5, A6, EXE LTR, LGL, A4, B5, A5, A6, EXE Manual Feed Slot...
  • Page 18 (4/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/ Fax Model MFC9870 MFC9850 Emulation PCL4 Resident Fonts 24 bitmap (PCL4 Comp.) Fonts Disk Based Yes (35 TrueType) Yes (35 TrueType) Paper Handling Size LTR, A4, B5, A5, B6, A6, EXE LTR, A4, B5, A5, B6, A6, EXE Manual Feed Slot Custom Size (2.75"...
  • Page 19 (4/6) Machine Type Multi- Function Center w/o Fax Model MFC9750 Emulation PCL4 Resident Fonts 24 bitmap (PCL4 Comp.) Fonts Disk Based Yes (35 TrueType) Paper Handling Size LTR, A4, B5, A5, B6, A6, EXE Manual Feed Slot Custom Size (2.75" x 5" to 8.5" x 14") Other Paper Type OHP, Envelopes, Labels, Organizer Sheet Weight (Paper Cassette)
  • Page 20 (5/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/o Fax Model MFC9600 DCP1200 MESSAGE CENTER Pro/MESSAGE MANAGER Pro Fax/Voice Mail Box Fax/Voice on Demand MESSAGE CENTER (PC MC) Fax Forwarding Paging ICM Recording Time OGM MC;MC Pro;Paging Fax/Voice Mail Box Fax/Voice on Demand VIDEO CAPTURE...
  • Page 21 (5/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/ Fax Model MFC9870 MFC9850 MESSAGE CENTER Pro/MESSAGE MANAGER Pro Fax/Voice Mail Box Fax/Voice on Demand MESSAGE CENTER (PC MC) Fax Forwarding Paging ICM Recording Time OGM MC;MC Pro;Paging Fax/Voice Mail Box Fax/Voice on Demand VIDEO CAPTURE...
  • Page 22 (5/6) Machine Type Multi- Function Center w/o Fax Model MFC9750 MESSAGE CENTER Pro/MESSAGE MANAGER Pro Fax/Voice Mail Box Fax/Voice on Demand MESSAGE CENTER (PC MC) Fax Forwarding Paging ICM Recording Time OGM MC;MC Pro;Paging Fax/Voice Mail Box Fax/Voice on Demand VIDEO CAPTURE Video Capture Video Print...
  • Page 23 (6/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/o Fax Model MFC9600 DCP1200 Formats (Import) Depends on viewer Depends on viewer Formats (Export) Depends on viewer Depends on viewer Pop Up Menu PCI Remote Setup Remote Setup for Date/Time Remote Setup for Tel No.
  • Page 24 (6/6) Machine Type Multi- Function Center w/ Fax Multi- Function Center w/o Fax Model MFC9870 MFC9850 Formats (Import) Formats (Export) Pop Up Menu PCI Remote Setup Remote Setup for Date/Time Remote Setup for Tel No. Registration I - 18...
  • Page 25 (6/6) Machine Type Multi- Function Center w/ Fax Model MFC9750 Formats (Import) Formats (Export) Pop Up Menu PCI Remote Setup Remote Setup for Date/Time Remote Setup for Tel No. Registration I - 19...
  • Page 26 CHAPTER II. INSTALLATION...
  • Page 27 CHAPTER II. INSTALLATION CONTENTS INSTALLING THE UPDATE DATA TO THE MACHINE ........II-1...
  • Page 28: Installing The Update Data To The Machine

    INSTALLING THE UPDATE DATA TO THE MACHINE If the program version is updated or the main PCB is replaced, install the update program onto the flash ROM of the main PCB. The program installation requires a PC/AT-compatible computer (which is capable of running MS- DOS or its compatible OS).
  • Page 29 Installing the update data onto the flash ROM of the machine Copy the update data and transfer utility onto the desired directory of the hard disk. e.g., C:\UPDATE Click the Start button, point to Programs, and then click MS-DOS Prompt to open an MS- DOS window.
  • Page 30 CHAPTER III. THEORY OF OPERATION...
  • Page 31: Table Of Contents

    CHAPTER III. THEORY OF OPERATION CONTENTS OVERVIEW......................III-1 MECHANISMS...................... III-2 Scanner Mechanism..................III-3 Laser Printing Mechanism ................III-5 2.2.1 Paper pick-up and registration mechanism..........III-5 2.2.2 Print process mechanism ..............III-6 2.2.3 Heat-fixing mechanism ................III-8 2.2.4 Paper ejecting mechanism ..............III-9 Sensors and Actuators.................
  • Page 32: Overview

    OVERVIEW * Provided on models supporting facsimile function. III - 1...
  • Page 33: Mechanisms

    MECHANISMS The machine is classified into the following mechanisms: n SCANNER MECHANISM - ADF mechanism - Document scanning mechanism n LASER PRINTING MECHANISM - Paper pick-up and registration mechanism - Print process mechanism (consisting of charging, exposing, developing, and transferring processes) with paper feeding mechanism - Heat-fixing mechanism with paper feeding mechanism...
  • Page 34: Scanner Mechanism

    Scanner Mechanism This mechanism consists of the following: - document tray ASSY which consists of a document chute and document tray, - automatic document feeder (ADF) unit which consists of a document feed roller ASSY, document ejection roller ASSY, ADF motor, and document front and rear sensors, and - scanner unit which consists of a scanner top cover, CCD unit, CCD drive mechanism, CCD HP sensor, and scanner base.
  • Page 35 This scanner mechanism supports a dual scanning system. (1) If you set documents with their faces up on the document chute and start the scanning operation, the ADF motor rotates so that the document feed roller ASSY feeds those documents into the ADF unit, starting from the top sheet to the bottom, page by page. Each document curves downwards and turns to the right so as to advance above the CCD unit, and then it is fed out to the document tray with the document ejection roller ASSY.
  • Page 36: Laser Printing Mechanism

    Laser Printing Mechanism 2.2.1 Paper pick-up and registration mechanism III - 5...
  • Page 37: Print Process Mechanism

    At the 1st stage, the controller drives the main motor without energizing the solenoid so that the paper feed roller simply idles. At the 2nd stage, the controller energizes the solenoid so that the paper feed roller no longer rotates and the paper pick-up roller starts rotating to pick up paper into the machine, a sheet at a time.
  • Page 38 The print process unit works with laser beam, electrical charges, and toner. The graph below shows the transition of electrical charge on the surface of the laser-sensitive drum through the four processes: charging, exposing, developing, and transferring processes. III - 7...
  • Page 39: Heat-fixing Mechanism

    2.2.3 Heat-fixing mechanism As the paper passes between the heater roller and the pressure roller in the heat-fixing unit, the heater roller fuses the toner on the paper. The controller monitors the internal resistance of the heater thermistor to keep the surface temperature of the heater roller constant by turning the halogen heater lamp on and off.
  • Page 40: Paper Ejecting Mechanism

    2.2.4 Paper ejecting mechanism After the paper passes through the heat-fixing process, it will be ejected from the heat-fixing unit by the paper ejection roller. If the leading edge of the paper pushes up the actuator of the paper ejection sensor, the sensor signals the start of paper ejection.
  • Page 41: Sensors And Actuators

    Sensors and Actuators This machine has ten sensors: eight photosensors and two thermistors as described below. Sensor name Type Located on Document front sensor Photosensor Document sensor PCB Document rear sensor Photosensor Document sensor PCB Manual insertion sensor Photosensor Engine PCB Registration sensor Photosensor Engine PCB...
  • Page 42 Location of Sensors and Actuators III - 11...
  • Page 43: Control Electronics

    CONTROL ELECTRONICS The hardware configuration of the machine is shown below. Provided on models supporting LAN interface. Provided on models supporting video capture. Provided on models supporting facsimile function. Provided on models available with a 2nd paper cassette (as an option). Configuration of Machine III - 12...
  • Page 44 CHAPTER IV. DISASSEMBLY/REASSEMBLY AND LUBRICATION...
  • Page 45 CHAPTER IV. DISASSEMBLY/REASSEMBLY AND LUBRICATION CONTENTS DISASSEMBLY/REASSEMBLY ................IV-1 Safety Precautions....................IV-1 Preparation......................IV-2 How to Access the Object Component ..............IV-2 Disassembly Order Flow ..................IV-3 Lower Rear Cover ..................IV-4 Access Plates R and F ................... IV-4 Paper Cassette....................IV-5 Document Tray ASSY ..................
  • Page 46 1.24 Inner Insulation Film, High-voltage Power Supply PCB, Engine PCB, and 2nd Cassette Relay PCB* ................ IV-53 1.25 Toner Sensor (light-receiver) PCB and Toner Sensor (LED) PCB....IV-55 1.26 Gears and Paper Pick-up Roller ..............IV-56 1.27 Paper Feed Roller ASSY................IV-57 1.28 Clutch Levers, Cassette Guide L, and Solenoid ..........
  • Page 47: Disassembly/reassembly

    DISASSEMBLY/REASSEMBLY n n Safety Precautions To prevent the creation of secondary problems by mishandling, observe the following precautions during maintenance work. (1) Unplug the power cord from the power outlet before accessing parts or units inside the machine. When having access to the power supply, be sure to unplug the power cord from the power outlet.
  • Page 48: Preparation

    Preparation Prior to proceeding to the disassembly procedure, (1) Unplug - the power cord, - the modular jack of the telephone line, - the PC interface cable, and - the modular jack of an external telephone set if connected. (Not shown below.) (2) Remove - the paper cassette and - the drum unit (with toner cartridge loaded).
  • Page 49: Disassembly Order Flow

    Disassembly Order Flow IV - 3...
  • Page 50: Lower Rear Cover

    Lower Rear Cover (1) Remove the three screws (two "a" and one "b") from the lower rear cover. Screw "b" is provided on those models available with a 2nd paper cassette (as an option). (2) Lightly pressing sections "X," pull out the lower rear cover. "a"...
  • Page 51: Paper Cassette

    Paper Cassette (1) Pull the pressure plate release lever to the front to release the pressure plate. (2) Fully slide the side guide (R or L) inwards (in the direction of arrow •) and remove the screw. Then release the latches (arrow ‚) and pull up the side guide (arrow ƒ). (3) Release the pressure plate from the bosses (arrow „) and remove it (arrow …).
  • Page 52: Document Tray Assy

    Document Tray ASSY (1) Fully open the document tray ASSY. (2) Lift up the document tray ASSY straight and pull the hinges up and out of the scanner unit. (3) Remove the three screws from each of the hinges. IV - 6...
  • Page 53 (4) Remove screw "a," then lightly tap the left end of the document chute to release the three hooks from the document tray. (5) Remove the sponge. (6) Remove screw "b" to take off the support plate. IV - 7...
  • Page 54: Upper Rear Cover

    Upper Rear Cover (1) Remove the two screws from the upper rear cover. (2) Release section "a" from the latch provided on the scanner mount and pull the top of the upper rear cover to the rear and upwards. Reassembling Notes •...
  • Page 55: Adf Unit

    ADF Unit (1) Remove screw "a" from the harness support. (2) Remove screw "b" to release the grounding wires. (3) Disconnect the following from the relay PCB: • CCD flat cable (P4) • ADF motor harness (4-pin, P3) • Document sensor harness (4-pin, P8) "a": Taptite, cup B M3x8 "b": Taptite, cup S M3x6 IV - 9...
  • Page 56 • (4) Turn the ADF unit in the direction of arrow , remove the plastic retaining ring, and release ‚ the arm (arrow ) from the boss provided on the scanner top cover. Turn the ADF unit back into place. ƒ...
  • Page 57: Disassembling The Adf Unit

    [ Disassembling the ADF Unit ] Open the ADF cover. Pull the ADF side cover outwards and release the ADF cover from the bosses provided on the ADF side covers. At each of the ADF side covers F and R, remove the screw, pull the unscrewed corner outwards to release it from the document ejection chute, and unhook the latch.
  • Page 58 At the front end of the document feed roller shaft, remove the pawled bushing by pulling its pawls outwards. At the rear end, pull the bushing outwards and lift up the document feed roller ASSY. At the front end of the upper LF roller (gray) shaft, remove the pawled bushing by pulling its pawls outwards.
  • Page 59 10) Remove the two screws and lift up the upper ADF chute. 11) Turn the document front sensor actuator as shown below and lift it up. 12) Turn the document rear sensor actuator as shown below and lift it up. 13) Disconnect the document sensor harness from the document sensor PCB and take out its harness from the harness guides.
  • Page 60 15) At the front end of the document ejection roller shaft, remove the pawled bushing by pulling its pawls outwards. At the rear end, pull the bushing outwards and lift up the document ejection roller ASSY. 16) Remove the three screws and take off the motor bracket. 17) At the front end of the lower LF roller (black) shaft, remove the pawled bushing by pulling its pawls outwards.
  • Page 61 Reassembling Notes • Take care not to mistake the upper LF roller ASSY (gray) for the lower LF roller ASSY (black). • When setting the document sensor PCB back into place, do not push it down straight, but first fit the PCB in the large latch and then fit it in the small latch (see the illustration given on page IV-13).
  • Page 62: Scanner Unit And Control Panel Assy

    Scanner Unit and Control Panel ASSY (1) Disconnect the following from the relay PCB: - CCD motor harness - Panel harness - Scanner HP sensor harness IV - 16...
  • Page 63 (2) Slide the scanner unit (with the control panel ASSY) to the rear by approx. 5 mm and then lift it up. (For the disassembly procedure of the scanner unit, refer to page IV-19.) IV - 17...
  • Page 64 (3) Remove the three screws from the underside of the scanner base. (4) Insert the tip of a flat screwdriver into each of the four holes provided in the scanner base and unhook the four latches while lifting up the control panel ASSY. (5) Disconnect the panel harness from the control panel PCB.
  • Page 65: Disassembling The Scanner Unit

    • When connecting the CCD motor harness, panel harness, and scanner HP sensor harness to the relay PCB, route them as shown below. [ Disassembling the Scanner Unit ] The disassembling job of the scanner unit should be done in a clean room to prevent dust or dirt from getting into the scanner unit.
  • Page 66 Turn the gear 17/97 to move the CCD unit to the right to make the following job easier. Remove screw "a" and take out the CCD rail clamp. (See the illustration given on the next page.) Remove two screws "b" from the CCD idle pulley holder, then remove the CCD drive belt from the idle pulley.
  • Page 67 Pull up the CCD motor harness and disconnect it from the CCD motor. 10) Remove three screws "c" from the motor bracket. 11) Lift up the motor bracket. 12) Remove two screws "d" from the CCD motor. The scanner grounding wire also comes off. 13) Disconnect the CCD HP sensor harness from the sensor.
  • Page 68 15) Remove the four screws and take off the flat cable clamp. Remove sponge 3 attached with adhesive tape. 16) Remove the CCD flat cable (which is attached with adhesive tape). 17) Remove the four screws and take off the guide plate. 18) Remove tape and sponges 1, then take out the panel harness and CCD HP sensor harness.
  • Page 69 Reassembling Notes • Route the panel harness and CCD HP sensor harness through the three notches, then tape them as illustrated on the previous page. • When replacing the CCD flat cable with a new one, be sure to arrange the new cable as illustrated below, then route it along the positioning rib as shown on the previous page.
  • Page 70: Disassembling The Control Panel Assy

    [ Disassembling the Control Panel ASSY ] Turn the control panel ASSY upside down. Remove two screws "a." Slightly lift up the control panel PCB, then unlock the FPC key connector and disconnect the FPC key. Next, unlock the LCD cable connector and disconnect the LCD flat cable. Remove six screws "b."...
  • Page 71: Relay Pcb

    Relay PCB (1) Disconnect the following harnesses from the relay PCB: - Speaker harness - Main-relay (panel) harness - Main-relay (CCD) harness - Main-relay (motors) harness (2) Remove the two screws. (3) Take out the relay PCB. Reassembling Notes • When setting the relay PCB back into place, be careful with the installation direction.
  • Page 72: Speaker

    Speaker À and slide the speaker spring in the direction of (1) Press the pawl in the direction of arrow arrow Á. (2) Lift up the speaker. IV - 26...
  • Page 73: Scanner Mount

    1.10 Scanner Mount (1) Remove two screws "a." (2) Open the front cover and remove two screws "b." À (3) Pull the tabs of the scanner mount to the front and upwards (in the direction of arrows ) to release them from the bosses provided on the main cover. Á...
  • Page 74 (5) Turn the scanner mount upside down. (6) Peel off anti-static brushes. NOTE: Once removed, they will become unusable and new parts will have to be put back in. (7) As shown below, warp the gear-equipped end of the exit roller and remove it. IV - 28...
  • Page 75 Reassembling Notes • When setting the scanner mount back into place: - at the right-hand side, raise the main-relay (panel) harness coming through the main cover up and through cutout "x" provided in the scanner mount. - at the left-hand side, pull up the main-relay (motors) harness and chassis grounding wire and raise them up and through square cutout "y"...
  • Page 76: Paper Sub Tray And Tray Holder

    1.11 Paper Sub Tray and Tray Holder (1) Pull out the paper sub tray. À (2) While pushing down the center of the paper sub tray to warp it (in the direction of arrow Á pull it out of the tray holder (arrow À...
  • Page 77: Vc Cover, Vc Bracket, And Vc Connector Pcb (for Models Supporting Video Capture

    1.12 VC Cover, VC Bracket, and VC Connector PCB (for models supporting video capture) (1) Remove two screws ("a" and "b"), then take off the VC cover. (2) Remove screw "c," take out the VC bracket together with the VC connector PCB, and disconnect the VC harness.
  • Page 78: Front Cover

    1.13 Front Cover Front Sub Cover (for models not supporting video capture) (1) For models not supporting video capture: Remove the screw and take off the front sub cover from the front cover. (2) Remove the screw from the left bottom of the front side of the main cover. (3) Hold the front cover at an angle of 45 and pull the front cover link to the left to release it from the front cover.
  • Page 79: Outer Chute And Paper Pinch Rollers

    1.14 Outer Chute and Paper Pinch Rollers (1) Pull up the outer chute and open it (in the direction of arrow •). (2) Remove the chute springs from the hooks provided on the main cover (arrow ‚), then lift up the outer chute (arrow ƒ).
  • Page 80: Main Cover

    1.15 Main Cover (1) Remove two screws "a" from the front side of the main cover. (2) Remove two screws "b" from the rear side of the main cover, and then pull corner edges "X" outwards to dislocate the main cover from the main chassis. Make sure that the cutout provided in the main cover is dislocated from the power inlet.
  • Page 81: Switch Cover (for Models Not Equipped With A Power Switch

    1.16 Switch Cover (for models not equipped with a power switch) (1) Push the locks of the switch cover as shown below and remove it. IV - 35...
  • Page 82: Laser Unit

    1.17 Laser Unit (1) Remove screw "a" and take off the harness cover. (2) Remove two screws "b." (3) Disconnect the polygon motor harness and laser flat cable from the laser unit. (4) Lift up the laser unit. NOTE: When handling the laser unit, take care not to touch the inside of the unit, glass, or mirror.
  • Page 83: Heat-fixing Unit And Fu Lamp

    1.18 Heat-fixing Unit and FU Lamp (1) Remove the screw from the harness duct. The chassis grounding wire also comes off. (2) Peel off tape and take off the main-relay (motors) harness, main-relay (CCD) harness, and VC harness* from the harness duct. (3) Unhook the harness duct from the main chassis in the directions of arrows •...
  • Page 84 (4) Remove three screws (two "a" and one "b"). (5) Disconnect the long heater wire (of the heater harness) from the upper center of the heat- fixing unit. (6) Disconnect the short heater wire (of the heater harness) from the left end of the heat-fixing unit.
  • Page 85 (8) To take out the FU lamp from the heat-fixing unit, remove two screws "c." (9) Unhook the two latches outwards (in the direction of arrows •) with the tip of a flat screwdriver and open the upper cover (arrow ‚). The upper and lower covers will become separated from each other.
  • Page 86 • When securing the lock plate R with screw "d," be sure to use the plastic jig as shown below to avoid damaging the edge of the FU lamp with a screwdriver. Lock plate R "d" FU lamp Plastic jig •...
  • Page 87: Fan

    1.19 Fan (1) Disconnect the fan harness from the engine PCB. (2) Remove two screws, take out the heater wires from the latch of the fan duct, and take off the fan duct together with the fan. IV - 41...
  • Page 88 (3) As shown below, pull the fan duct outwards and take out the fan. Reassembling Notes • Put the fan back into place so that the rating label faces outwards and upside down. • Route the heater wires through the latch of the fan duct as shown on the previous page. IV - 42...
  • Page 89: Drive Gear Assy And Main Motor Assy

    1.20 Drive Gear ASSY and Main Motor ASSY (1) Remove five screws from the drive gear ASSY. (2) Tilt the drive gear ASSY towards you while taking care not to drop the develop joint and spring, and then disconnect the main motor harness. (3) Remove the front cover link and idle gear 56 from the main chassis.
  • Page 90 (4) Remove four screws and take off the main motor ASSY from the drive gear ASSY. Reassembling Notes • If you have removed the gear 39/98 from the drive gear ASSY, hook the spring and tape it as shown below. IV - 44...
  • Page 91: Ncu Shield And Ncu Pcb

    1.21 NCU Shield and NCU PCB* (*Provided on models supporting facsimile function.) (1) Remove three screws from the NCU shield, then take off the NCU shield. (2) USA version: Disconnect the main-NCU harness from the main PCB. European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main PCB.
  • Page 92 Reassembling Notes [USA version] • Route the main-NCU harness above the main-relay (motors) harness as illustrated below. [European version] • As illustrated below, route the main-NCU harness and main-NCU harness 2 between the NCU PCB and the power supply bracket to prevent them from interfering with the primary circuitry on the NCU PCB.
  • Page 93: Bottom Plate, Main Pcb, And Bottom Insulation Film

    1.22 Bottom Plate, Main PCB, and Bottom Insulation Film (1) Disconnect the following harnesses and flat cable from the main PCB: • Main-relay (panel) harness (13-pin, P3) • Main-LV-engine harness (5-pin, P18) • Laser flat cable (P6) • Engine-main harness (12-pin, P5) •...
  • Page 94 (2) Turn the main chassis upside down. (3) Remove 14 screws (nine "a" and five "b"). (4) Slightly lift up the bottom plate and pull it to the rear until you can remove screw "c." (5) Remove screw "c" to release the grounding wire. (6) For models available with a 2nd paper cassette: Removes screw "d"...
  • Page 95 (8) Remove screw "d" and disconnect the paper ejection sensor PCB from the main PCB. (9) Remove five screws (three "e" and two "f"), then take off the main PCB from the bottom plate. (10) Remove the bottom insulation film. "d"...
  • Page 96 Setting up the main PCB after replacement IV - 50...
  • Page 97: Low-voltage Power Supply Pcb And Power Inlet

    1.23 Low-voltage Power Supply PCB and Power Inlet (1) Remove two screws "g" and take off the rear underbar. (2) Remove screw "h." (3) Slightly lift up the low-voltage power supply PCB and disconnect the heater harness and main-LV-engine harness. The low-voltage power supply PCB is connected to the power inlet with soldered lead wires.
  • Page 98 Reassembling Notes • When connecting the power inlet to the low-voltage power supply PCB, insert the brown and blue lead wires into eyelets L and N in the PCB, respectively, and then solder those wires on the solder side of the PCB. •...
  • Page 99: Inner Insulation Film, High-voltage Power Supply Pcb, Engine Pcb, And 2nd Cassette Relay Pcb

    1.24 Inner Insulation Film, High-voltage Power Supply PCB, Engine PCB, and 2nd Cassette Relay PCB* (*Provided on models available with a 2nd paper cassette) (1) Remove screw "a" and take off the inner insulation film. (2) Remove three screws (two "b" and one "c") from the high-voltage power supply PCB and engine PCB.
  • Page 100 (6) For models available with a 2nd paper cassette: Pull the 2nd cassette relay PCB bracket to take out its harness. Remove the screw and take off the 2nd cassette relay PCB from its bracket. Reassembling Notes • Before reinstalling the high-voltage power supply PCB, push in the spring with a flat screwdriver until it snaps into place as shown below.
  • Page 101: Toner Sensor (light-receiver) Pcb And Toner Sensor (led) Pcb

    1.25 Toner Sensor (light-receiver) PCB and Toner Sensor (LED) PCB (1) At the right-hand plate of the main chassis, remove the screw from the toner sensor (light- receiver) PCB, release its harness from the two harness latches, and then pull it out. (2) At the left-hand plate of the main chassis, press the both sides of the lens support on the toner sensor (LED) PCB with your fingers to release them from the main chassis, release its harness from the two latches, and then pull it out.
  • Page 102: Gears And Paper Pick-up Roller

    1.26 Gears and Paper Pick-up Roller (1) Place the main chassis upside down. (2) Remove the inner gear 54 (by pulling its pawl outwards), gear 45 set P/R, gear 20 P/R, and the bushing from the end of the paper pick-up roller shaft. (3) Remove the pawled bushing by pulling its pawl outwards, then remove the paper pick-up roller and its shaft.
  • Page 103: Paper Feed Roller Assy

    1.27 Paper Feed Roller ASSY (1) Unhook the latch (arrow •) provided on the underside of the plastic frame by using a small flat screwdriver and pull out the gear 21 (arrow ‚). (2) Place the main chassis rightside up. (3) At the right end of the paper feed roller shaft, pull up the pawl of the bushing (arrow ƒ) with the tip of a flat screwdriver and move the paper feed roller ASSY to the left (arrow „).
  • Page 104: Clutch Levers, Cassette Guide L, And Solenoid

    1.28 Clutch Levers, Cassette Guide L, and Solenoid (1) Turn the main chassis upside down. (2) Remove the two screws and take off the front underbar (which is shown on page IV-51). (3) Place the main chassis rightside up. (4) Remove the clutch lever F/R by pulling its pawl outwards. (5) Remove the clutch lever spring and clutch lever P/R.
  • Page 105: Cleaning Of High-voltage Contacts And Grounding Contacts

    1.29 Cleaning of High-voltage Contacts and Grounding Contacts If any toner particles, paper dust or dirt are on the contacts, clean them out. This will ensure that power flows correctly to enable printing. IV - 59...
  • Page 106 IV - 60...
  • Page 107: Lubrication

    LUBRICATION Apply the specified lubricants to the lubrication points as shown below. Lubricant amount Lubricant type (Manufacturer Half of a rice-sized pinch Rice-sized pinch Two rice-sized pinches Five rice-sized pinches of grease of grease (6 mm of grease (12 mm of grease (30 mm (3 mm Molykote grease...
  • Page 108: 2 ] Scanner Mount

    [ 2 ] Scanner mount IV - 62...
  • Page 109: 3 ] Drive Gear Assy

    [ 3 ] Drive gear ASSY IV - 63...
  • Page 110: 4 ] Paper Cassette

    [ 4 ] Paper cassette IV - 64...
  • Page 111 CHAPTER V. MAINTENANCE MODE...
  • Page 112 CHAPTER V. MAINTENANCE MODE CONTENTS ENTRY INTO THE MAINTENANCE MODE............V-1 LIST OF MAINTENANCE-MODE FUNCTIONS........... V-2 DETAILED DESCRIPTION OF MAINTENANCE-MODE FUNCTIONS ....V-4 EEPROM Parameter Initialization............... V-4 Printout of Scanning Compensation Data ........... V-5 ADF Performance Test................V-7 Test Pattern 1..................... V-8 Firmware Switch Setting and Printout ............
  • Page 113: Entry Into The Maintenance Mode

    1. ENTRY INTO THE MAINTENANCE MODE For machines w/ fax American models: To make the machine enter the maintenance mode, press the Function, *, 2, 8, 6, and 4 keys in this order. Within 2 seconds European models: To make the machine enter the maintenance mode, press the Menu, *, 2, 8, 6, and 4 keys in this order.
  • Page 114: List Of Maintenance-mode Functions

    2. LIST OF MAINTENANCE-MODE FUNCTIONS Maintenance-mode Functions Function Reference Code Function Subsection (Page) EEPROM Parameter Initialization 3.1 (V-4) Printout of Scanning Compensation Data 3.2 (V-5) ADF* Performance Test 3.3 (V-7) Test Pattern 1 3.4 (V-8) Firmware Switch Setting 3.5 (V-9) Printout of Firmware Switch Data 3.5 (V-53) Operational Check of LCD...
  • Page 115 - - - - - - - - - - - - - - - - - - - - - - - - - - IMPORTANT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Basically, the maintenance-mode functions listed on the previous page should be accessed by service personnel only.
  • Page 116: Detailed Description Of Maintenance-mode Functions

    3. DETAILED DESCRIPTION OF MAINTENANCE-MODE FUNCTIONS EEPROM Parameter Initialization Function The machine initializes the parameters, user switches, and firmware switches registered in the EEPROM, to the initial values. Entering the function code 01 initializes all of the EEPROM areas, but entering 91 does not initialize some areas, as listed below. Function code Data item Maintenance-mode functions...
  • Page 117: Printout Of Scanning Compensation Data

    Printout of Scanning Compensation Data Function The machine prints out the white and black level data for scanning compensation. Operating Procedure Do not start this function merely after powering on the machine but start it after carrying out a sequence of scanning operation. Unless the machine has carried out any scanning operation, this function cannot print out correct scanning compensation data.
  • Page 118 Scanning Compensation Data List V - 6...
  • Page 119: Adf Performance Test

    ADF Performance Test Function The machine counts the documents fed by the automatic document feeder (ADF) and displays the count on the LCD for checking the ADF performance. Operating Procedure (1) Set documents. (Allowable up to the ADF capacity.) The "DOC. READY" will appear on the LCD. (2) Press the 0 and 8 keys in this order.
  • Page 120: Test Pattern 1

    Test Pattern 1 Function This function, much like the copying function, prints out test pattern 1 to allow the service personnel to check for record data missing or print quality. Operating Procedure Press the 0 and 9 keys in this order in the initial stage of the maintenance mode. The figure below shows test pattern 1.
  • Page 121: Firmware Switch Setting And Printout

    Firmware Switch Setting and Printout [ A ] Firmware switch setting Function The machine incorporates the following firmware switch functions (WSW01 through WSW43) which may be activated with the procedures using the control panel keys and buttons. The firmware switches have been set at the factory in conformity to the communications standards and codes of each country.
  • Page 122 Firmware Switches (WSW01 through WSW43) Continued WSW No. Function Reference Page WSW35 Function setting 13 V-44 WSW36 Function setting 14 V-45 WSW37 Function setting 15 V-46 WSW38 Function setting 16 V-47 WSW39 Function setting 17 V-48 WSW40 Function setting 18 V-49 WSW41 Function setting 19...
  • Page 123 Detailed Description for the Firmware Switches WSW01 (Dial pulse setting) Selector Function Setting and Specifications No. 1 2 Dial pulse generation mode 10-N No. 3 4 60 ms Break time length in pulse dialing 67 ms 40 ms (for 16 PPS) 64 ms (at 106-ms intervals) No.
  • Page 124 Selector 7: Switching between pulse (DP) and tone (PB) dialing, by the function switch This selector determines whether or not the dialing mode may be switched between the pulse (DP) and tone (PB) dialing by using the function switch. Selector 8: Default dialing mode, pulse (DP) or tone (PB) dialing This selector sets the default dialing mode (pulse dialing or tone dialing) which may be changed by the function switch.
  • Page 125 WSW03 (PABX* mode setting) Selector Function Setting and Specifications CNG detection when sharing a modular wall socket with a 0: A 1: B telephone No. 2 3 4 0 0 0 : 50 ms 0 0 1 : 210 ms Min.
  • Page 126 Selectors 6 and 7: Dial tone detection in PABX These selectors activate or deactivate the dial tone detection function which detects a dial tone when a line is connected to the PABX. Setting both of these selectors to "1" activates the dial tone detection function so that the machine starts dialing upon detection of a dial tone when a line is connected.
  • Page 127 WSW04 (TRANSFER facility setting) Selector Function Setting and Specifications Not used. No. 5 6 200 ms Earth time length for earth 300 ms function 500 ms 700 ms No. 7 8 80 ms Break time length for flash 110 ms function 250 ms 500 ms...
  • Page 128 WSW05 (1st dial tone and busy tone detection Selector Function Setting and Specifications No. 1 2 3 0 0 0 3.5 sec. WAIT 0 0 1 7.0 sec. WAIT 0 1 0 10.5 sec. WAIT 1st dial tone detection 0 1 1 14.0 sec.
  • Page 129 Selectors 5 and 6: Busy tone detection in automatic sending mode These selectors determine whether or not the machine automatically disconnects a line upon detection of a busy tone in automatic sending mode. Setting selector 6 to "0" ignores a busy tone so that the machine does not disconnect the line. Setting selectors 5 and 6 to "0"...
  • Page 130 WSW06 (Pause key setting and 2nd dial tone detection) Selector Function Setting and Specifications No. 1 2 3 0 0 0 : No pause 0 0 1 : 3.5 sec. WAIT 0 1 0 : 7 sec. WAIT 0 1 1 : 10.5 sec.
  • Page 131 Selectors 1 through 3: Pause key setting and 2nd dial tone detection Selectors No WAIT is inserted even if the Pause key is pressed. If you press the Pause key during dialing, the machine will insert WAIT as defined in the above table. If the Pause key is pressed repeatedly, the machine inserts the specified WAIT multiplied by the number of depressions.
  • Page 132 WSW07 (Dial tone setting 1) Selector Function Setting and Specifications No. 1 2 Frequency band range Narrows by 10 Hz Initial value Widens by 10 Hz Line current detection 0: No 1: Yes No. 4 5 6 0 0 0 : -21 dBm 0 0 1 : -24 dBm...
  • Page 133 WSW08 (Dial tone setting 2) Selector Function Setting and Specifications No. 1 2 3 0 0 0 : 50 ms 0 0 1 : 210 ms 0 1 0 : 500 ms 1st dial tone detection time length 0 1 1 : 800 ms 1 0 0 : 900 ms...
  • Page 134 WSW09 (Protocol definition 1) Selector Function Setting and Specifications Frame length selection 0: 256 octets 1: 64 octets Use of non-standard commands 0: Allowed 1: Prohibited No. 3 4 times No. of retries 3 times 2 times 1 time T5 timer 0: 300 sec.
  • Page 135 WSW10 (Protocol definition 2) Selector Function Setting and Specifications Not used. Time length from transmission of 0: 100 ms 1: 50 ms the last dial digit to CML ON Time length from CML ON to CNG 0: 2 sec. 1: 4 sec. transmission Time length from CML ON to CED transmission (except for facsimile-...
  • Page 136 WSW11 (Busy tone setting) Selector Function Setting and Specifications Narrows by 10 Hz Frequency band range Initial value Widens by 10 Hz Not used. 1: 400-600/400-600 ms 1: 175-440/175-440 ms ON/OFF time length ranges (More than one setting allowed) 1: 700-800/700-800 ms 1: 110-410/320-550 ms 1: 100-660/100-660 ms NOTE: WSW11 is not applicable in those countries where no busy tone detection is supported.
  • Page 137 WSW12 (Signal detection condition setting) Selector Function Setting and Specifications No. 1 1500 ms Min. OFF time length of calling 500 ms signal (Ci) 700 ms 900 ms No. 3 6 sec. Max. OFF time length of calling 7 sec. signal (Ci) 9 sec.
  • Page 138 WSW13 (Modem setting) Selector Function Setting and Specifications No. 1 0 km Cable equalizer 1.8 km 3.6 km 5.6 km No. 3 -43 dBm Reception level -47 dBm -49 dBm -51 dBm 0: 0 dB 1: 8 dB 0: 0 dB 1: 4 dB Modem attenuator 0: 0 dB...
  • Page 139 WSW14 (AUTO ANS facility setting) Selector Function Setting and Specifications 13 Hz Frequency band selection 15 Hz (Lower limit) 23 Hz 20 Hz Frequency band selection 30 Hz (Upper limit) 55 Hz 70 Hz Fixed to once Fixed to 2 times Fixed to 3 times Fixed to 4 times 1 to 2 times...
  • Page 140 WSW15 (REDIAL facility setting) Selector Function Setting and Specifications No. 1 5 minutes Selection of redial interval 1 minute 2 minutes 3 minutes No. 3 16 times 1 times No. of redialings 2 times 3 times 15 times Redialing for no response sent Redialing No redialing from the called terminal...
  • Page 141 WSW16 (Function setting 1) Selector Function Setting and Specifications Not used. CCITT superfine recommendation 0: OFF 1: ON Not used. Max. document length limitation 0: 400 cm 1: 90 cm Stop key pressed during reception 0: Not functional 1: Functional Selector 2: CCITT superfine recommendation If this selector is set to "1,"...
  • Page 142 WSW17 (Function setting 2) Selector Function Setting and Specifications No. 1 No alarm Off-hook alarm Always valid Valid except when 'call reservation' is selected. Not used. Calendar clock type U.S.A. type 1: European type Not used. Non-ring reception 1: ON Not used.
  • Page 143 WSW18 (Function setting 3) Selector Function Setting and Specifications Not used. No. 2 40 sec. Detection enabled time for CNG 0 sec. (No detection) and no tone 5 sec. 80 sec. Not used. Registration of station ID Permitted Prohibited No. 7 No monitoring Up to phase B at the calling station only...
  • Page 144 WSW19 (Transmission speed setting) Selector Function Setting and Specifications No. 1 No. 4 First transmission speed choice 2,400 bps for fallback 4,800 bps 7,200 bps 9,600 bps 12,000 bps Last transmission speed choice for fallback 14,400 bps V. 34 mode 0: Permitted 1: Prohibited V.
  • Page 145 WSW20 (Overseas communications mode setting) Selector Function Setting and Specifications EP* tone prefix 0: OFF 1: ON Overseas communications mode 0: 2100 Hz 1: 1100 Hz (Reception) Overseas communications mode 0: OFF 1: Ignores DIS once. (Transmission) No. 4 Min. time length from reception of 100 ms CFR to start of transmission of 200 ms...
  • Page 146 WSW21 (TAD setting 1) Selector Function Setting and Specifications Not used. Erasure of message stored in the memory after the message 0: Yes 1: No transfer Selector 8: Erasure of message Setting this selector to "0" will erase the message recorded in the memory after the document retrieval feature transfers the message.
  • Page 147 WSW23 (Communications setting) Selector Function Setting and Specifications Starting point of training check 0: From the head of a series of zeros (TCF) 1: From any arbitrary point No. 2 Allowable training error rate 0.5% No. 4 Decoding error rate for transmission of RTN Not used.
  • Page 148 WSW24 (TAD setting 2) Selector Function Setting and Specifications Not used. Time length from CML ON to 4 sec. start of pseudo ring backtone 3 sec. transmission 2 sec. 1 sec. Not used. Selectors 3 and 4: Time length from CML ON to start of pseudo ring backtone transmission These selectors set the length of time from CML-ON up to the start of pseudo ring backtone transmission.
  • Page 149 WSW26 (Function setting 4) Selector Function Setting and Specifications Not used. Dialing during document reading 0: Disabled 1: Enabled into the temporary memory in in- memory message transmission No. 4 No. of CNG cycles to be detected (when the line is connected via the external telephone except in the external TAD mode) No.
  • Page 150 WSW27 (Function setting 5) Selector Function Setting and Specifications Not used. Ringer OFF setting Not used. Detection of distinctive ringing pattern Not used. Toner save mode NOTE: Selector 4 is applicable only to the U.S.A. versions Selector 2: Ringer OFF setting This selector determines whether or not the ringer can be set to OFF.
  • Page 151 WSW28 (Function setting 6) Selector Function Setting and Specifications No. 1 2 3 0 0 0 0 dB 0 0 1 +1 dB Transmission level of DTMF high- 0 1 0 +2 dB band frequency signal 0 1 1 +3 dB 1 0 0 0 dB 1 0 1...
  • Page 152 WSW29 (Function setting 7) Selector Function Setting and Specifications Not used. Impedance switching control in 0: OFF 1: ON pulse dialing Beep when the memory area for 0: No 1: Yes the activity report becomes full NOTE: Selectors 7 and 8 are applicable to the European version only. Selector 8: Beep when the memory area for the activity report becomes full If this selector is set to "1,"...
  • Page 153 WSW31 (Function setting 9) Selector Function Setting and Specifications Not used. Default reduction rate for failure of 0: 100% 1: 75% (Letter) automatic reduction during 87% (A4) recording 95% (Legal) Not used. Minimum short-OFF duration in 0: 130 ms 1: 90 ms distinctive ringing Not used.
  • Page 154 WSW32 (Function setting 10) Selector Function Setting and Specifications Not used. No. 5 Standard Default resolution Fine Super fine Photo No. 7 Automatic Default contrast Super light Super dark Selectors 5 and 6: Default resolution These selectors set the default resolution which applies when the machine is powered up or completes a transaction.
  • Page 155 WSW33 (Function setting 11) Selector Function Setting and Specifications Not used. Report output of polled trans- 0: Yes mission requests Not used. NOTE: Selector 6 is not applicable to American versions. V - 43...
  • Page 156 WSW34 (Function setting 12 Selector Function Setting and Specifications Not used. No. of CNG cycles to be detected No. 6 (when the line is connected via the machine or external telephone except in the external TAD mode) No. 6 Number of DTMF tone signals for inhibiting the detection of CNG during external TAD operation CNG detection when the external...
  • Page 157 WSW36 (Function setting 14) Selector Function Setting and Specifications ECP* mode 0: ON Recovery from inactive PC 0: Disabled Enabled interface PC power-off recognition time 0: Normal Long Not used. Escape from phase C 0: Yes No. 6 7 8 0 0 0 : 0 (Not ignored) 0 0 1 :...
  • Page 158 WSW37 (Function setting 15) Selector Function Setting and Specifications Printout of the stored image data 0: No of an unsent document onto the error report Erasure of the stored image data 0: No of an unsent document at the time of the subsequent in-memory message transmission Not used.
  • Page 159 WSW38 (Function setting 16) Selector Function Setting and Specifications No. 1 Automatic Setting of the equalizer Fixed to 4 points Fixed to 16 points Sending level of guard tone at 0: Normal - 7 db Normal phase 2 Stepping down the transmission 0: 2400 bps 4800 bps speed at fallback each...
  • Page 160 WSW39 (Function setting 17) Selector Function Setting and Specifications No. 1 No. 5 2400 bps First transmission speed choice 4800 bps for fallback 7200 bps 9600 bps 12000 bps 14400 bps 16800 bps 19200 bps 21600 bps 24000 bps 26400 bps Last transmission speed choice 28800 bps for fallback...
  • Page 161 WSW40 (Function setting 18) Selector Function Setting and Specifications Not used. Not masking Masking Masking of symbol rate(s) No. 3 3429 symbols/sec No. 4 3200 symbols/sec No. 5 3000 symbols/sec No. 6 2800 symbols/sec No. 7 Not used. No. 8 2400 symbols/sec NOTE: WSW40 takes effect only in the V.
  • Page 162 WSW41 (Function setting 19) Selector Function Setting and Specifications Not used. No. 5 -10 dBm -11 dBm Modem attenuator -12 dBm -13 dBm -14 dBm -25 dBm NOTE: WSW41 takes effect only in the V. 34 mode. Selectors 5 through 8: Modem attenuator These selectors are used to adjust the transmitting level of the modem when the reception level at the remote station is improper due to line loss.
  • Page 163 WSW42 (Function setting 20) Selector Function Setting and Specifications Incoming mail server POP* Incoming mail server SMTP* Internet-FAX forward function JBIG* coding system Disabled Enabled Alarm message when the corona Enabled Disabled wire abnormally emits ions Issue of a drum cleaning Enabled Disabled prompting sheet when the corona...
  • Page 164 WSW43 (Function setting 21) Selector Function Setting and Specifications Addition of a header (station ID) to FAX images to be sent to PCs having e-mail addresses No. 2 50 ms Wait time for PCFax reception (Class 2) and FPTS command 100 ms transmission 150 ms...
  • Page 165 [ B ] Printout of firmware switch data Function The machine prints out the setting items and contents specified by the firmware switches. Operating Procedure (1) Press the 1 key twice in the initial stage of the maintenance mode. The "PRINTING" will appear on the LCD. (2) The machine prints out the configuration list as shown in the figure below.
  • Page 166: Operational Check Of Lcd

    Operational Check of LCD Function This function allows you to check whether the LCD on the control panel works normally. Operating Procedure (1) Press the 1 and 2 keys in this order in the initial stage of the maintenance mode. The LCD shows (2) For machines w/ fax: Press the Start key.
  • Page 167 MFC9600 DCP1200 MFC9850/9870 MFC9750 Key & Button Entry Order V - 55...
  • Page 168: Sensor Operational Check

    Sensor Operational Check Function This function allows you to check whether the eight sensors--document front sensor, document rear sensor, cover sensor, registration sensor, toner sensor, paper ejection sensor, manual insertion sensor, and cassette sensor--operate correctly. Operating Procedure (1) Press the 3 and 2 keys in this order in the initial stage of the maintenance mode. The machine beeps 1100 Hz and 400 Hz tones cyclically through the following volumes for testing the speaker.
  • Page 169: Ccd Scanner Area Setting

    CCD Scanner Area Setting Function The machine sets the CCD scanner area and stores it into the EEPROM. Operating Procedure (1) Press the 5 key twice in the initial stage of the maintenance mode. The "SCANNER AREA SET," "BLACK LEVEL INIT," and "WHITE LEVEL INIT" will appear on the LCD in this order.
  • Page 170: Erasure Of Received Fax Messages Temporarily Stored In The Flash Memory

    3.11 Erasure of Received FAX Messages Temporarily Stored in the Flash Memory (Not applicable to the American version) Function This function erases received FAX messages which are temporarily stored in the flash memory so that they will not be lost by powering off the equipment. This function also erases activity report data stored in the flash memory.
  • Page 171: Output Of Transmission Log To The Telephone Line (not Applicable To Machines W/o Fax

    3.13 Output of Transmission Log to the Telephone Line (Not applicable to machines w/o fax) Function This function outputs the transmission log (that the machine has stored about the latest transmission) to the telephone line. It allows the service personnel to receive the transmission log of the user's machine at a remote location and use it for analyzing problems arising in the user's machine.
  • Page 172 CHAPTER VI. ERROR INDICATION AND TROUBLESHOOTING...
  • Page 173 CHAPTER VI. ERROR INDICATION AND TROUBLESHOOTING CONTENTS ERROR INDICATION ................... VI-1 1.1 Machine Errors ....................VI-1 [ 1 ] Error messages on the LCD ............VI-1 [ 2 ] Error codes shown in the "MACHINE ERROR X X" message..........VI-4 1.2 Communications Errors (Not applicable to machines w/o fax) ......
  • Page 174: Error Indication

    1. ERROR INDICATION To help the user or the service personnel promptly locate the cause of a problem (if any), the machine incorporates the self-diagnostic functions which display error messages for machine errors and communications errors. (Note that machines w/o fax do not support error messages for communications errors.) For the communications errors, the machine also prints out the transmission verification report and the communications list.
  • Page 175: Machine Error Xx

    Messages on the LCD Probable Cause CLEAN UP SCANNER In the scanning compensation data list printed by the mainte- nance-mode function code 05 (refer to Chapter V, Section 3.2), less than fifty percent of the white level data is faulty. (This message may appear only in the maintenance mode.) COOLING DOWN The controller, which monitors the internal resistance of the in-...
  • Page 176 Messages on the LCD Probable Cause PLS OPEN COVER To display the relating detailed error code, use maintenance- mode function code 82. (Refer to Chapter V, Section 3.12.) If this message appears, open and close the front cover. The message may disappear if opening/closing the front cover removes the error.
  • Page 177 [ 2 ] Error codes shown in the "MACHINE ERROR X X " message Error Code Error factor (Hex.) ( 71 Polygon motor does not synchronize with the reference clock. ) ( 72 Cannot detect Beam Detect signal. ) ( 73 No toner cartridge loaded.
  • Page 178 Error Code Error factor (Hex.) ( AE The CCD HP sensor sticks to OFF, indicating that the CCD unit has not returned to the home position. ) ( AF The CCD HP sensor sticks to ON, indicating that the CCD unit has stayed in the home position.
  • Page 179: Communications Errors (not Applicable To Machines W/o Fax

    Communications Errors (Not applicable to machines w/o fax) If a communications error occurs, the machine emits an audible alarm (intermittent beeping) for approximately 4 seconds, displays the corresponding error message, and prints out the transmission verification report if the machine is in sending operation. VI - 6...
  • Page 180 n n Definition of Error Codes on the Communications List Calling Code 1 Code 2 Causes Wrong number called. Retrieval file error. Image data entry error. No dial tone detected before start of dialing. Busy tone detected before dialing. 2nd dial tone not detected. No loop current detected.* Busy tone detected after dialing or called.
  • Page 181 Code 1 Code 2 Causes EOR and NULL received. Effective command not received. Unable to reserve a command receiver memory. Image data file error. Compatibility [checking the NSF and DIS] Code 1 Code 2 Causes Remote terminal only with V.29 capability in 2400 or 4800 bps transmission.
  • Page 182 Instructions received from the remote terminal [checking the NSC, DTC, NSS, and DCS] Code 1 Code 2 Causes Illegal coding system requested. Illegal recording width requested. ECM requested although not allowed. Polled while not ready. No document to send when polled. Nation code or manufacturer code not coincident.
  • Page 183 ID checking Code 1 Code 2 Causes Password plus "lower 4 digits of telephone number" not coincident. Password not coincident. Polling ID not coincident. Entered confidential mail box ID uncoincident with the mail box Relay broadcasting ID not coincident. Entered retrieval ID uncoincident with that of the mail box ID. DCN reception Code 1 Code 2...
  • Page 184 Signal isolation Code 1 Code 2 Causes Unable to detect video signals and commands within 6 seconds after CFR is transmitted. Received PPS containing invalid page count or block count. (10) Video signal reception Code 1 Code 2 Causes Error correction sequence not terminated even at the final transmission speed for fallback.
  • Page 185 (11) General communications-related Code 1 Code 2 Causes Unable to receive the next-page data. Unable to receive polling even during turn-around transmission due to call reservation. PC interface error. Transmission canceled by pressing the Stop key (before completion of the G3 FAX negotiation). Transmission canceled by pressing the Stop key (after completion of the G3 FAX negotiation).
  • Page 186 Modem error details (Code 3) Code 3 Causes Timeout waiting for INFO0. Checksum error in INFO0. Timeout waiting for tone A or B. Timeout waiting for first phase reverse. Timeout waiting for probing cut-off tone. Timeout waiting for second phase reverse. Timeout waiting for end of probing.
  • Page 187 Code 3 Causes S-sequence finished before prediction in phase 3. Timeout waiting for S-Sbar in phase 3. Timeout waiting for S-Sbar in phase 3. Timeout waiting for S in phase 3. Training after TRN failure. Problem with S-sequence in phase 4. FED turned off in S-sequence in phase 4.
  • Page 188 (14) Machine error Code 1 Code 2 Causes Burn-in operation canceled by pressing the Stop key. Unrecoverable MODEM error. VI - 15...
  • Page 189: Troubleshooting

    TROUBLESHOOTING Introduction This section gives the service personnel some of the troubleshooting procedures to be followed if an error or malfunction occurs with the machine. It is impossible to anticipate all of the possible problems which may occur in future and determine the troubleshooting procedures, so this section covers some sample problems.
  • Page 190 (3) All cables and harnesses are firmly connected. (4) None of the fuses are blown. Recording paper Check that: (1) A recommended type of recording paper is used. (2) The recording paper is not dampened. VI - 17...
  • Page 191: Troubleshooting Procedures

    Troubleshooting Procedures [ 1 ] Control panel related Trouble Check: (1) LCD shows nothing. Panel harness between the control panel PCB and relay PCB Main-relay (panel) harness between the relay PCB and main PCB Control panel PCB Low-voltage power supply PCB Main PCB (2) Control panel inoperative.
  • Page 192: 3 ] Communications Related

    [ 3 ] Communications related Trouble Check: (1) No tone is transmitted. Main PCB NCU PCB [ 4 ] Paper/document feeding related Trouble Check: (1) Neither "COPY: PRESS COPY" Sensors by using the maintenance-mode function nor "FAX: NO. & START" code 32.
  • Page 193: 5 ] Print-image Related

    [ 5 ] Print-image related If the received or sent image has any problem, first make a copy with the machine. If the copied image is normal, the problem may be due to the remote terminal; if it is abnormal, proceed to the following checks: Trouble Action to be taken...
  • Page 194 Trouble Action to be taken (3) Light At the scanner Check the following components: - CCD unit - Main PCB At the printer side Replace the toner cartridge with a new one and print 4 to 5 pages. If the problem persists, proceed to the next step. Remove the toner cartridge and start printing.
  • Page 195 Trouble Action to be taken (5) Black and blurred vertical At the scanner stripes or band Check the following components: - CCD unit At the printer side Clean the paper path which may be contaminated with toner. Slide the wire cleaner to clean the corona wire inside the drum unit.
  • Page 196 Trouble Action to be taken (9) White vertical streaks At the scanner Check the following components: - CCD unit At the printer side Clean the laser beam window on the laser unit. Replace the toner cartridge. Replace the drum unit. (10) White horizontal stripes At the printer side Replace the drum unit.
  • Page 197 Trouble Action to be taken (12) Faulty image registration At the printer side (Leading edge of image Instruct the user not to load paper exceeding the limit on the starts too late on paper) paper cassette(s). Instruct the user to use the recommended types of paper. Replace the paper cassette(s).
  • Page 198 Trouble Action to be taken (15) Dirt back of paper At the printer side Clean the pressure roller in the heat-fixing unit. Replace the heat-fixing unit. Replace the drum unit. Replace the high-voltage power supply PCB. (16) Poor fixing At the printer side Instruct the user to use paper of the recommended weight (less than 36 lb./m Clean the toner sensors (LED and light-receiver).
  • Page 199: 6 ] Pc-driven Or Video Capture-driven Printing

    Trouble Action to be taken (20) Fading (black to white) At the printer side Replace the toner cartridge. Replace the high-voltage power supply PCB. (21) Gray background At the printer side Instruct the user to use paper of the recommended weight (less than 36 lb./m Clean the toner sensors (LED and light-receiver).
  • Page 200: Location Of High-voltage Contacts And Grounding Contacts

    Location of High-voltage Contacts and Grounding Contacts VI - 27...
  • Page 201 VI - 28...
  • Page 202 MFC9600/DCP1200 MFC9750/MFC9850/MFC9870 Appendix 1. EEPROM Customizing Codes...
  • Page 203 EEPROM Customizing Codes This function allows you to customize the EEPROM according to language, function settings, and firmware switch settings. n Operating Procedure (1) For machines w/ fax: American models: To make the equipment enter the maintenance mode, press the Function, *, 2, 8, 6, and 4 keys in this order. Within 2 seconds European models: To make the equipment enter the maintenance mode, press the Menu, *, 2, 8, 6, and 4 keys in this order.
  • Page 204 n EEPROM Customizing Codes List Model Versions MFC9600 DCP1200 U.S.A. 1001 1001 CANADA 0002 0002 Australia 0006 New Zealand 0027 ASIA 0040 Model Versions MFC9750 MFC9850 MFC9870 Germany 0003 0003 0003 U.K. 0004 0004 France 0005 0005 0005 Norway 0007 0007 Belgium 0008...
  • Page 205 MFC9600/DCP1200 MFC9750/MFC9850/MFC9870 Appendix 2. Circuit Diagrams A. Main PCB B. Engine PCB C. Network Control Unit (NCU) PCB D. Control Panel PCB E Relay PCB F. Power Supply PCBs...
  • Page 206 Main PCB 1/7...
  • Page 207 Main PCB 2/7...
  • Page 208 Main PCB 3/7...
  • Page 209 Main PCB 4/7...
  • Page 210 Main PCB 5/7...
  • Page 211 Main PCB 6/7...
  • Page 212 Main PCB 7/7...
  • Page 213 Engine PCB...
  • Page 214 NCU PCB (U.S.A./Canada)
  • Page 215 NCU PCB (Germany/United Kingdom/France/Norway/Belgium/ Netherlands/Switzerland/Ireland/Denmark/Austria/ Spain/Italy/Sweden)
  • Page 216 R D P S J W 2 ( 5 ) J W 1 3 J W 1 0 ( P 1 ) ( 1 0 ) ( 1 0 ) S 0 V C M L ( P 1 ) C 3 1 J W 1 2 L I N E...
  • Page 217 NCU PCB (Asia)
  • Page 218 Control Panel PCB (MFC9600/MFC9850/MFC9870)
  • Page 219 Control Panel PCB 1/2 (DCP1200/MFC9750)
  • Page 220 Control Panel PCB 2/2 (DCP1200/MFC9750)
  • Page 221 Relay PCB...
  • Page 222 Power Supply PCB (100-120V) Low-voltage power supply...
  • Page 223 Power Supply PCB (200-240V) Low-voltage power supply...
  • Page 224 Power Supply PCB High-voltage power supply...
  • Page 225 Jan. ’00 ‚ SM8C5401 Printed in Japan...
  • Page 226 MULTI-FUNCTION CENTER PARTS REFERENCE LIST MODEL: MFC9750 / MFC9850 / MFC9870 (For Germany / United Kingdom / France / Norway / Belgium / Netherlands / Switzerland / Ireland / Denmark / Austria / Spain / Italy / Sweden)
  • Page 227 © Copyright Brother 1999 All rights reserved No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. Specifications are subject to change without prior notice.
  • Page 228 NOTES FOR USING THIS PARTS REFERENCE LIST 1. In the case of ordering parts, it needs mentioning the following items: (1) Code (2) Q' ty (3) Description Note: No orders without Parts Code or Tool No. can be accepted. [Example] REF.NO.
  • Page 230 List1(MAIN FRAME) REF.NO. CODE Q'TY DESCRIPTION REMARKS UL9311001 MAIN MOTOR ASSY 087320616 TAPTITE, CUP S M3X6 LJ4069001 SOLENOID 000300415 SCREW, BIND M3X4 UL8984001 FRONT COVER LINK UL9099001 TONER SENSOR (LED) PCB 087320616 TAPTITE, CUP S M3X6 LE1166001 THERMISTOR FILM LG2423001 IN CASING TEMPERATURE THERMISTOR LJ4745001 UL9104001...
  • Page 232 List2(LASER UNIT) REF.NO. CODE Q'TY DESCRIPTION REMARKS LJ4157001 LASER UNIT SUPPLY ASSY 087321615 TAPTITE, CUP S M3X16 MFC9750, MFC9850, MFC9870...
  • Page 234 List3(PAPER TRANSPORT) REF.NO. CODE Q'TY DESCRIPTION REMARKS UL9059001 JOINT UL9060001 PAPER FEED ROLLER ASSY UL9062001 PAWLED BUSHING UL9066001 PAPER PICKUP ROLLER UL9062001 PAWLED BUSHING UL9069001 CONDUCTIVE BUSHING LJ4499001 ELECTRODE SPRING LJ4843001 OUTER CHUTE 1 SUPPLY ASSY MFC9750, MFC9850, MFC9870...
  • Page 236 List4(PAPER CASSETTE) REF.NO. CODE Q'TY DESCRIPTION REMARKS LJ4181001 PAPER CASSETTE, A4 SUPPLY ASSY UL9078001 SIDE GUIDE L UL9079001 SIDE GUIDE R U73515001 SCREW, PAN CUP B M2.6X5 UL9083001 PAPER REAR GUIDE UL9084001 SEPARATION PAD SUPPORT ASSY UL9090001 SEPARATION PAD SPRING MFC9750, MFC9850, MFC9870...
  • Page 238 List5(HEAT FIXING UNIT) REF.NO. CODE Q'TY DESCRIPTION REMARKS LJ4168001 HEAT FIXING UNIT, 230V SUPPLY ASSY UL8902001 THERMISTOR ASSY 087311215 TAPTITE, CUP B M3X12 LJ4169001 HEAT ROLLER SUPPLY ASSY LJ4163001 FUSER LAMP, 230V SUPPLY ASSY UL8918001 PRESSURE ROLLER 087320815 TAPTITE, CUP S M3X8 LJ4740001 SHOULDER SCREW MFC9750, MFC9850, MFC9870...
  • Page 240 List6(COVER) REF.NO. CODE Q'TY DESCRIPTION REMARKS LJ4122001 MAIN COVER ASSY, WHITE(1495) UL9122001 PINCH ROLLER ASSY UL9125001 PINCH ROLLER SPRING UL9126001 OUTER CHUTE, WHITE(1495) UL9127001 CHUTE SPRING L UL9128001 CHUTE SPRING R UU2102001 FRONT COVER ASSY, WHITE(1495) UU2094001 FRONT SUB COVER, WHITE(1495) 087310815 TAPTITE, CUP B M3X8 LE1197001...
  • Page 242 List7(SCANNER UNIT) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1524001 SCANNER UNIT SUPPLY ASSY UU7490001 CCD MOTOR LG2017001 CCD MOTOR HARNESS 0A4300605 SCREW, PAN (S/P WASHER) M3X6 LG2239001 CCD HP SENSOR LG2019001 CCD HP SENSOR HARNESS LG2025001 PANEL-MAIN HARNESS LE2074001 CCD IDLE PULLEY HOLDER ASSY LE1552001 CCD UNIT SUPPLY ASSY LG2196001...
  • Page 244 List8(ADF&TRAY) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1525001 ADF UNIT SUPPLY ASSY UG6609001 DOCUMENT SENSOR PCB LG2014001 DOCUMENT SENSOR HARNESS UF7026001 DOCUMENT FRONT SENSOR ACTUATOR LE2008001 DOCUMENT REAR SENSOR ACTUATOR LE2011001 COMPRESSION SPRING LE2551001 RUBBER HOLDER A UU2055001 SEPARATION RUBBER LE1513001 SPRING PLATE A ASSY LE2470001 ADF FILM...
  • Page 246 List9(CONTROL PANEL MFC9750) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1686001 CONTROL PANEL SUPPLY ASSY LE1336001 CONTROL PANEL, WHITE(1495) LJ4283001 KEY, FUNCTION, WHITE(1496) LJ4231002 KEY, STOP, PINK(2205) LJ4284001 KEY, TEN, WHITE(1495) LJ4285001 KEY, START, GREEN(5159) LE1577001 CONTROL PANEL PCB SUPPLY ASSY UG4552000 LE1556001 FPC KEY SUPPLY ASSY 087270815...
  • Page 248 List9(C PANEL MFC9850 9870) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1611001 CONTROL PANEL SUPPLY ASSY, WHITE(1495) LE2273001 CONTROL PANEL, WHITE(1495) UF4393007 KEY, TEN, WHITE(1495) LE2274001 KEY, COPY/FAX AREA, WHITE(1495) LE1340001 KEY, SCANNER, WHITE(1495) UF8174008 KEY, COPY, WHITE(1495) UF8174010 KEY, STOP, PINK(2205) UF8174011 KEY, START, PURPLE(6255) UF8176009...
  • Page 250 List10(PCB ASSY) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1627011 MAIN PCB SUPPLY ASSY, MFC9870 LE1627012 MAIN PCB SUPPLY ASSY, MFC9850 LE1628001 MAIN PCB SUPPLY ASSY, MFC9750 LG2295001 NCU PCB ASSY, MFC9850/9870 LJ4175001 LOW VOLTAGE POWER SUPPLY PCB, 230V LE1364001 HIGH VOLTAGE POWER SUPPLY PCB, SUPPLY ASSY LE1365001 ENGINE PCB SUPPLY ASSY 087320616...
  • Page 252 List11(ACCESSORIES) REF.NO. CODE Q'TY DESCRIPTION REMARKS LG2358001 AC CORD, MFC9750 FOR GER/FRA/NOR/BEL/NLD/SPA/ITA/SWE MFC9870 FOR NOR/BEL/NLD/AUS/SPA/ITA/SWE LG2085001 AC CORD, MFC9850/9870 FOR GER/FRA LG2359001 AC CORD, MFC9750 FOR UK, MFC9870 FOR IRE LG2086001 AC CORD, MFC9870 FOR UK LG2360001 AC CORD, MFC9750 FOR CHE LG2361001 AC CORD, MFC9870 FOR DEN UG4558001...
  • Page 253 List12(PRINTED MATERIAL) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1487001 OWNER'S MANUAL ASSY, MFC9750 FOR GER (INCLUDING OWNER'S MANUAL(1-1), WARRANTY CARD) LE1491001 OWNER'S MANUAL ASSY, MFC9750 FOR UK (INCLUDING OWNER'S MANUALS(1-1), 3 WARRANTY CARDS) LE1492001 OWNER'S MANUAL ASSY, MFC9750 FOR FRA (INCLUDING OWNER'S MANUAL(1-1), 2 WARRANTY CARDS) LE1495001 OWNER'S MANUAL ASSY, FAX9750 FOR NOR (INCLUDING OWNER'S MANUAL(1-1), 2 WARRANTY CARDS)
  • Page 254 List12(PRINTED MATERIAL) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1441001 OWNER'S MANUAL ASSY, FAX9870 FOR SWE (INCLUDING OPERATION MANUAL(1-1), MFL MANUAL(1-2), 2 WARRANTY CARDS) (1-1) LE1488003 OWNER'S MANUAL, MFC9750 FOR GER (1-1) LE1488004 OWNER'S MANUAL, MFC9750 FOR UK (1-1) LE1488005 OWNER'S MANUAL, MFC9750 FOR FRA (1-1) LE1488007 OWNER'S MANUAL, MFC9750 FOR NOR...
  • Page 255 List13(CARTON) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1480001 CARTON, BROTHER MFC9750 LE1585001 CARTON, BROTHER MFC9850 LE1387001 CARTON, BROTHER MFC9870 LE1232001 STYROFOAM ASSY UE1688001 POLY-ETHYLENE BAG FOR MACHINE, 1000X1000 EXCEPT FOR FRA UE1688002 POLY-ETHYLENE BAG FOR MACHINE, 1000X1000 FOR FRA UE3122001 CARTON FOR MANUAL LJ4546001 BAG FOR DRUM/TONER, 400X480 MFC9750, MFC9850, MFC9870...
  • Page 256 PL8C5433 Ver. D...
  • Page 257 MULTI-FUNCTION CENTER PARTS REFERENCE LIST MODEL: DCP1200 / MFC9600 (For U.S.A / Canada Australia / New Zealand / Asia / Gulf )
  • Page 258 © Copyright Brother 1999 All rights reserved No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. Specifications are subject to change without prior notice.
  • Page 259 NOTES FOR USING THIS PARTS REFERENCE LIST 1. In the case of ordering parts, it needs mentioning the following items: (1) Code (2) Q' ty (3) Description Note: No orders without Parts Code or Tool No. can be accepted. [Example] REF.NO.
  • Page 261 List1(MAIN FRAME) REF.NO. CODE Q'TY DESCRIPTION REMARKS UL9311001 MAIN MOTOR ASSY 087320616 TAPTITE, CUP S M3X6 LJ4069001 SOLENOID 000300415 SCREW, BIND M3X4 UL8984001 FRONT COVER LINK UL9099001 TONER SENSOR (LED) PCB 087320616 TAPTITE, CUP S M3X6 LE1166001 THERMISTOR FILM LG2423001 IN CASING TEMPERATURE THERMISTOR LJ4745001 UL9104001...
  • Page 263 List2(LASER UNIT) REF.NO. CODE Q'TY DESCRIPTION REMARKS LJ4157001 LASER UNIT (SP) 087321615 TAPTITE, CUP S M3X16 MFC9600, DCP1200...
  • Page 265 List3(PAPER TRANSPORT) REF.NO. CODE Q'TY DESCRIPTION REMARKS UL9059001 JOINT UL9060001 PAPER FEED ROLLER ASSY UL9062001 PAWLED BUSHING UL9066001 PAPER PICKUP ROLLER UL9062001 PAWLED BUSHING UL9069001 CONDUCTIVE BUSHING LJ4499001 ELECTRODE SPRING LJ4843001 OUTER CHUTE 1 (SP) LJ5591001 PLANETARY GEAR ASSY (SP) UL9070001 GEAR 21 UL8985001...
  • Page 267 List4(PAPER CASSETTE) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1162001 PAPER CASSETTE ASSY, LEGAL FOR US/CSA (SP) LJ4181001 PAPER CASSETTE ASSY, A4 FOR ARL/NZ/ASA/GUL (SP) UL9078001 SIDE GUIDE L UL9079001 SIDE GUIDE R U73515001 SCREW, PAN CUP B M2.6X5 UL9083001 PAPER REAR GUIDE UL9084001 SEPARATION PAD SUPPORT ASSY UL9090001...
  • Page 269 List5(HEAT FIXING UNIT) REF.NO. CODE Q'TY DESCRIPTION REMARKS LJ4164001 HEAT FIXING UNIT, 115V FOR US/CAN (SP) LJ4168001 HEAT FIXING UNIT, 230V FOR ARL/NZ/ASA/GUL (SP) UL8902001 THERMISTOR ASSY 087311215 TAPTITE, CUP B M3X12 LJ4169001 HEAT ROLLER SUPPLY ASSY LJ4160001 FUSER LAMP, 115V FOR US/CAN (SP) LJ4163001 FUSER LAMP, 230V FOR ARL/NZ/ASA/GUL (SP) LJ4853001...
  • Page 271 List6(COVER) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE7282001 MAIN COVER ASSY, WHITE(1495), MFC9600 FOR US/CAN LJ5753001 MAIN COVER ASSY, WHITE(1495), MFC9600 FOR ARL/NZ/ASA, DCP1200 UL9122001 PINCH ROLLER ASSY UL9125001 PINCH ROLLER SPRING LJ5763001 OUTER CHUTE, WHITE(1495) UL9127001 CHUTE SPRING L UL9128001 CHUTE SPRING R UU2074001 FRONT COVER ASSY, WHITE(1495), MFC9600 FOR US/CAN...
  • Page 273 List7(SCANNER UNIT) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1524001 SCANNER UNIT (SP) UU7490001 CCD MOTOR LG2017001 CCD MOTOR HARNESS 0A4300605 SCREW, PAN (S/P WASHER) M3X6 LG2239001 CCD HP SENSOR LG2019001 CCD HP SENSOR HARNESS LG2025001 PANEL-MAIN HARNESS LE2074001 CCD IDLE PULLEY HOLDER ASSY LE1552001 CCD UNIT (SP) LG2196001...
  • Page 275 List8(ADF&TRAY) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1525001 ADF UNIT (SP) UG6609001 DOCUMENT SENSOR PCB LG2014001 DOCUMENT SENSOR HARNESS UF7026001 DOCUMENT FRONT SENSOR ACTUATOR LE2008001 DOCUMENT REAR SENSOR ACTUATOR LE2011001 COMPRESSION SPRING LE2551001 RUBBER HOLDER A UU2055001 SEPARATION RUBBER LE1513001 SPRING PLATE A ASSY LE2470001 ADF FILM 1-10...
  • Page 277 List9(CONTROL PANEL DCP1200) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1554001 CONTROL PANEL ASSY, WHITE(1495), DCP1200 (SP) LE1336001 CONTROL PANEL, WHITE(1495), DCP1200 (SP) LJ4283001 KEY, FUNCTION, WHITE(1496) LJ4231002 KEY, STOP, PINK(2205) LJ4284001 KEY, TEN, WHITE(1495) LJ4285001 KEY, START, GREEN(5159) LG2326001 CONTROL PANEL PCB ASSY, DCP1200 UG4552000 LE1556001 FPC KEY (SP)
  • Page 279 List9(CONTROL PANEL MFC9600) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1527001 CONTROL PANEL ASSY, WHITE(1495), MFC9600 (SP) LE2273001 CONTROL PANEL, WHITE(1495), MFC9600 UF4393007 KEY, TEN, WHITE(1495) LE2274001 KEY, COPY/FAX AREA, WHITE(1495) LE1340001 KEY, SCANNER, WHITE(1495) UF8174008 KEY, COPY, WHITE(1495) UF8174010 KEY, STOP, PINK(2205) UF8174011 KEY, START, PURPLE(6255) UF8176009...
  • Page 281 List10(PCB ASSY) REF.NO. CODE Q'TY DESCRIPTION REMARKS LG2320001 MAIN PCB ASSY, DCP1200 LG2226001 MAIN PCB ASSY, MFC9600 FOR US/CAN LE1627011 MAIN PCB ASSY, MFC9600 FOR ARL/NZ/ASA (SP) LG2139001 NCU PCB ASSY, MFC9600 FOR US/CAN LG2311006 NCU PCB ASSY, MFC9600 FOR ARL/NZ LG2305040 NCU PCB ASSY, MFC9600 FOR ASA LJ8855001...
  • Page 283 List11(ACCESSORIES) REF.NO. CODE Q'TY DESCRIPTION REMARKS UG6121001 AC CORD FOR US/CAN LG2162001 AC CORD FOR ARL/NZ/GUL LG2086001 AC CORD, BS, MFC9600 FOR ASA LG2085001 AC CORD, VDE, MFC9600 FOR ASA (IDN)/GUL UG4558001 INTERFACE CABLE LE1325001 CD-ROM ASSY, DCP1200 LE1222001 CD-ROM ASSY, MFC9600 FOR US/CAN/ARL/NZ/ASA/GUL LE7150001 CD-ROM ASSY, MFC9600 FOR ARL/NZ/ASA LG3077001...
  • Page 284 List12(PRINTED MATERIAL) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1328001 OWNER'S MANUAL ASSY, DCP1200 FOR US (INCLUDING OWNER'S MANUAL(1-1), LICENSE GUIDE, WARRANTY CARD, TEST SHEET AND REORDER FORM) LE1451001 OWNER'S MANUAL ASSY, DCP1200 FOR CAN (INCLUDING OWNER'S MANUALS(1-1), LICENSE GUIDE, WARRANTY CARD, REORDER FORM AND PANEL SHEET) LE1735001 OWNER'S MANUAL ASSY, DCP1200 FOR GUL (INCLUDING OWNER'S MANUALS(1-1), LICENSE GUIDE)
  • Page 285 List13(CARTON) REF.NO. CODE Q'TY DESCRIPTION REMARKS LE1330001 CARTON, BROTHER DCP1200 FOR US LE1454001 CARTON, BROTHER DCP1200 FOR CAN LE1736001 CARTON, BROTHER DCP1200 FOR GUL LE1229001 CARTON, BROTHER MFC9600 FOR US LE1467001 CARTON, BROTHER MFC9600 FOR CAN LE1564001 CARTON, BROTHER MFC9600 FOR ARL/NZ/ASA LE1232001 STYROFOAM ASSY UE1688001...
  • Page 286 PL8C5405 Ver. K...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jean DesRosiers Jan 09, 2017 05:48:
    Est-ce possible de copier sans fil avec le modèle MFC 9600 ?

    Merci !