Search; Fax Redial; Storing Numbers; Storing A Pause - Brother FAX-2840 Basic User's Manual

Chapter 8

Search

You can search alphabetically for names you
have stored in the One Touch and Speed Dial
memories. (See Storing One Touch Dial
numbers uu page 43 and Storing Speed Dial
numbers uu page 43.)
a
Press (Address Book) twice.
b
Press the dial pad key for the first few
letters of the name. (See Entering text
uu page 113.)
Press OK.
c
Press a or b to scroll until you find the
name you are looking for.
Press OK.
d
Press Start.
Note
• If you do not enter a letter and press OK in
step b, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letter
is not stored.

Fax redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Start to try again. If you want to make a
second call to the last number dialed, you can
save time by pressing Redial/Pause and
Start.
Redial/Pause only works if you dialed from
the control panel.
42

Storing numbers

8
You can set up your machine to do the
following types of easy dialing: One Touch,
Speed Dial and Groups for Broadcasting
faxes. When you dial a quick dial number, the
LCD shows the name, if you stored it, or the
number.
If you lose electrical power, the quick dial
numbers stored in the memory will not be lost.

Storing a pause

Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
8
8
8