Setting The Print Density; Toner Save - Brother MFC-9870 Owner's Manual

50
C H A P T E R S I X
If the MEMORY RECEPTION function is OFF at this time...
The current fax reception will continue, with the remaining page(s) being
stored in memory, subject to available memory. Subsequent incoming fax
calls will not be automatically answered until fresh paper is put in the
paper cassette. The last fax received will be printed as soon as fresh
paper is put in the cassette.
1
Press Menu, 1, 2, 6. The screen displays
6.MEM.RECEIVE
2
Use or to select ON or OFF.
3 Press Set when the screen displays your selection.
4
Press Stop to exit.

Setting the Print Density

If your machine is printing too light or too dark, you can adjust the print
density level. The new setting will remain until you change it again.
1
Press Menu, 1, 2, 7.
2
Press or to select your setting. Each key press changes the
print density to the next setting.
3
When the screen shows the setting you want, press Set.
4
Press Stop to exit.

Toner Save

You can conserve toner using this feature. When you set Toner Save to
ON, print appears somewhat lighter. The default setting is OFF.
1
Press Menu, 1, 2, 9.
2
Press or to turn ON (or OFF).
3
Press Set.
4
Press Stop to exit.