LN2600 Rugged Security Router
36
An electrostatic discharge (ESD) grounding strap
Mounting brackets, mounting screws, heat sink unit, and matching screws provided
with the rack-mounting kit
Ground label and ground lug provided with the rack-mounting kit
To mount the LN2600 router on the 19 in. rack:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Keep the LN2600 router on a horizontal surface near the rack.
2.
Attach the heat sink unit provided with the rack-mounting kit to the rear side of the
3.
LN2600 router, and secure it with eight heat sink screws.
Figure 8: LN2600 Router with Heat Sink Unit
1—
Heat sink screws
Attach the rack-mount brackets to the sides of the LN2600 router using one shoulder
4.
screw on each side.
2—
Heat sink unit
Copyright © 2018, Juniper Networks, Inc.