Juniper LN2600 Manual page 88

LN2600 Rugged Security Router
74
POST: Enabled
Firmware Image Status:
Primary Bootstrap: UP TO DATE
....
WARNING: Autorecovery feature is not available as
this system does not support a recovery partition
Starting filesystem cleanup ... Done
Loading configuration ...
....
This additional sample console output shows the file system cleanup feature is enabled
with non-volatile memory read-only (NVMRO) switch enabled as well:
....
NVMRO: Read-only
watchdog: Armed
FPGA: Enabled
FS Cleanup: Enabled
POST: Enabled
Firmware Image Status:
Primary Bootstrap: UP TO DATE
....
Remounting directory /cf/var/home: 5MBytes
Preserving directory /cf/etc: 5MBytes
Filesystem cleanup skipped - NVMRO Read-only
Loading configuration ...
....
No files are deleted when NVMRO is set to
setting.
After the system completes its boot process, you can review the list of removed files by
reading the file_cleanup.log
root@ln1000% cat /var/tmp/file_cleanup.log
/cf/var/log/appidd
/cf/var/log/bin_messages
/cf/var/log/chassisd
/cf/var/log/cosd
/cf/var/log/dcd
.....
/cf/var/tmp/policy_status
/cf/var/tmp/rtsdb/if-rtsdb
/cf/var/tmp/spu_kmd_init
/cf/var/tmp/vpn_tunnel_orig.id
root@ln1000%
To determine the value of the
root@ln1000% sysctl kern.fs_clean_boot
kern.fs_clean_boot: 1
root@ln1000%
regardless of the
Read-only
file:
environmental variable using the CLI:
fs_clean_boot
fs_clean_boot
Copyright © 2018, Juniper Networks, Inc.