Table 4: LN2600 Router Status LED (continued)
Status LED Color
Steady red
Steady green
Blinking green
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Meaning
Error condition.
Ready for operation. The router is powered on and has successfully booted and run
SPOST and POST diagnostics.
Powering on and then running SPOST and POST diagnostics, or running individual
diagnostics, or performing an upgrade.
NOTE:
The status LED on Initial power-on may briefly flash red color while
running the diagnostic tests.
Diagnostic Tests on page 75
LN2600 Router Front Panel Overview on page 7
Chapter 2: Components
9