Changing Date, Time And Daylight Saving Time - Bosch amax 2100 Operation Manual

26 en | Changing date, time and daylight saving time
5 Changing date, time and daylight
saving time
Master and installer users can change the date, time and the
daylight saving time settings of the panel.
The daylight saving time setting determines when daylight
saving time will start and end. Therefore, date and time has to
be set correctly.
Predefined daylight saving time settings are available for four
regions. Alternatively, a daylight saving time setting can be
configured individually.
Daylight saving time starts and ends according to the daylight
saving time settings of a certain region. Individually configured
daylight saving time starts and ends at 1 a.m.
How to set date, time and the daylight saving time settings
1.
2.
3.
4.
5.
6.
7.
8.
2017.04 | 07 | F.01U.295.569
Enter your code + [5] [1] and press [#].
Enter the date and the time and press [#].
The new date and time is set.
The DST OPTIONS menu is shown.
If there is daylight saving time in your region, select the
setting for your region and press [#].
Or, if your region is not listed:
Select 5-customize to individually configure the daylight
saving time settings.
Select START DST to determine when the daylight saving
time setting should start and press [#].
Select the month and press [#].
In ORDINAL select the ordinal number of the week and
press [#].
E.g. if you select 1-1st, the daylight saving time setting will
start in the first week of the month selected previously, and
so on.
Select the week day and press [#].
Select STOP DST to determine when the daylight saving
time setting should stop, repeat steps 7 to 9 and press [#].
Bosch Sicherheitssysteme GmbH
AMAX panel