Matrix Telecom SARVAM UMG Quick Start Manual page 20

This is a typical connection of a BRI Line to the BRI Port in the TE mode:
ISDN
Network
LED indication for BRI Ports
Port Status
Commands from Application to BRI Port
Events to Application from BRI Port
a. The current LED state will remain the same until the next command is received from the
application on the BRI Port. For example, if the current LED state is Green/Red ON, on the
next command received, the LED will be turned OFF. It will remain OFF until the next com-
mand is received. When the next command is received it will be turned Green/Red ON
again. This process continues.
b. Same as above note.
16
NT-1
Rx1
4
Tx
Tx1
5
Rx
Tx2
Rx2
Power
U-Interface
(2-wire)
ETERNITY GENX
3
TxA
4
RxA
5
RxB
6
TxB
NC V-
NC V+
BRI port
S/T Interface
(4-wire)
LED Color LED Cadence
Toggle
Green
command
Red
Toggle
Matrix SARVAM UMG Quick Start
a
at each
b
at each event