Casio IT-G500 Series Software Manual page 148

(3) Message list
No.
Some items have not been input. Input
1 the setting items.
An illegal value has been input for an
2 address. Input the setting item with a
value of 0~255.
In illegal value has been input for a
3 subnet mask. Fix the setting.
An illegal value has been input for the
number of units. Input the setting item
4
with a value of 1~254.
Writing information to LAN cradles.
5
Cannot communicate with the LAN
6 cradle. Check the connection.
Failed to write to the LAN cradle. Press
7 the Set button again.
Cannot access the LAN cradle. Press
8 the Set button again.
Finished all LAN cradle settings.
9
Message Content and action
This is issued if there is any omission in the
setting items.
Input the setting items.
This is issued if there is an input value outside
the range 0~255 among the settings. Input the
setting items again correctly.
This is issued if a value has been input for subnet
mask that does not match the specification. Input
subnet mask again.
This is issued if there is an input value outside
the range 1~254 for the number of units. Input
the number of units again.
This is displayed when a polling operation is
performed for 15s during writing.
This is issued if no connection can be detected
between the HT and the LAN cradle for 15s. Fix
the connection with the LAN cradle.
This is issued if the set information could not be
written correctly to the LAN cradle. Press the Set
button again.
This is issued if the IP information could not be
read from the LAN cradle. Press the Set button
again.
This is displayed if the write process has been
performed for a many times as the set number of
units.
148