Casio IT-G500 Series Software Manual page 33

(4) Bluetooth connection status LED
This is used for notification of Bluetooth connection status.
Item
Connection established
via SS wireless
Time continuously ON
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
(5) User-defined LED
This is used for other notifications defined by the user.
Item
User definition
Time continuously ON
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
(6) W-WAN connection status LED
This is used for notification of W-WAN connection status.
Item
Connection established
via W-WAN
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
- W-LAN wireless, W-WAN, and GPS all control the LED in the same color category, so the have the
same lighting specification.
(7) GPS connection status LED
This is used for notification of GPS connection status.
Item
Connection established
via GPS
- Use as the scanner scanning LED has priority. User access from a private library is also possible.
- W-LAN wireless, W-WAN, and GPS all control the LED in the same color category, so the have the
same lighting specification.
Specification
On in blue for 1 second, off for 2 seconds
Specification
Color: Refer to "2.1 List of Functions".
Time: Set on time and off time
30 minutes (off when VDET is detected.)
Specification
On in orange for 1 second, off for 2 seconds
Specification
On in orange for 1 second, off for 2 seconds
33
Attribute
L_BT
Attribute
Attribute
L_WWAN
Attribute
L_GPS