Casio IT-G500 Series Software Manual page 217

No. Item
1 Positioning
quality
2 Selection
method
3 Positioning
status
4 Reception
time
5 S/N ratio
Position display
No. Item
1 Latitude
2 Longitude
3 Direction
4 Speed
5 Always display
North at top
6 Display satellite
7 Display direction
mark
Displays the subject of positioning. "GPS" is displayed if the power to the
GPS Module is on.
"Auto" is displayed if the power to the GPS Module is on.
Indicates the reliability of the positioning data, as "3D", "2D", or
"Unknown".
The sequence is "3D" > "2D" > "Unknown".
Displays the satellite from which the signal was received, and result of
time setting.
The satellite number is shown on the left while the signal strength of that
satellite's signal is indicated in the bar.
The stronger the signal is, the further the bar is displayed towards the
right edge of the screen.
Displays the latitude of the positioning result.
Displays the longitude of the positioning result.
Displays the traveling direction of the positioning result.
Displays the traveling speed of the positioning result.
With this checked, the displayed direction is always shown with north
on top.
When unchecked, the satellite position is not displayed.
With this checked, the satellite position is displayed as a white circle
containing the satellite's number.
When unchecked, the satellite position is not displayed.
With this checked, the traveling direction is displayed as a red arrow.
When unchecked, the red arrow is not displayed.
Operation
Operation
217