Audio/ Buzzer - Casio IT-G500 Series Software Manual

2.4 Audio/ buzzer

The functions are as follows:
1.
Mic function
– Use this to record sound to the Voice Recorder. (Monaural)
Use conversation over WAN (only models equipped with WEH6.5 Pro) The output target during
–
talk is the receiver.
2.
Speaker function
Use this to play audio memos and WAV files. (Stereo sound -> converted to monaural for
–
output)
Output the key click and alarm sounds.
–
Each sound can be muted or set for volume individually.
–
– The shutter sound is output from the speaker. (but not during talk)
3.
When using a BT headset
Audio output is sent to the headset (with the exception of the shutter sound (not during talk)).
–
– Allow mic input from the headset to be used for recording.
Use for conversation over WAN.
–
4.
Buzzer functions
– The scan complete sound, warning sound, and user-specified sounds are produced.
The buzzer sound is output from the speaker, with higher priority than audio data.
–
5.
Headphone jack
– Casio-approved headsets can be used.
Plugging a headset into the jack automatically switches the audio channel.
–
(WEH6.5 Pro only )
Earphone mic
Receiver
Speaker
28
MIC