2.13 USB
This section explains USB functions and specifications.
List of functions
Connection item
USB function
USB host
LAN Cradle
IP setup
Basic specifications
2.13.1
(1) USB switching
- Switching between the terminal's microA/B connectors and the cradle
The terminal's microA/B connectors and the cradle are used by switching exclusively between them,
using the same USB controller.
The switching algorithm is as follows:
- The microA/B connector is selected in normal circumstances
- When the terminal is placed in the cradle, the microA/B is cut off, and the system switches
compulsorily to the cradle side.
- The cradle creates a mode that fixes the microA/B connector as the connector to use, regardless of
whether the terminal is in the cradle. This is intended for situations when the cradle is only used for
the recharge function.
<Method of fixing the microA / B connector>
When you run the following program with the argument, you can change settings.
¥Windows¥CradleMode.exe
Argument: 1 -> microA/B connector fixing
0 -> Standard
Execution example: CradleMode.exe 1
Function
Virtual serial port connection (FLCE)
LED connection notification function
WMDC connection
USB Storage
USB-MODEM
USB-LAN
USB Serial
LED notification function
WAN interface
External expansion connector
IP write to cradle
Setting from the cradle to the terminal
88
IT-G500
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Exclusive
Yes
Yes
Yes