Casio IT-G500 Series Software Manual page 80

- LED light switch function
The LED light can be turned on and off. It can be used regardless of whether or not the camera is
in use. The intensity (brightness) cannot be switched.
- Flash (stroboscope) function
LED flash capture can be used when capturing sill images. The LED flash has three modes: Flash
Off (the default mode), Flash On, and Auto Flash.
Item
Flash function
- Compulsory shutter sounding function
The shutter sound is generated by the audio function during photo shooting. It will sound in all
situations, (including when audio is set to mute and when earphones are being used) to prevent
voyeurism.
- Focus adjustment
The CMOS camera built into the terminal is equipped with a focus adjustment function to enable the
operator to capture focused images.
This adjustment function comes in the form of a fixed-focus switch and an auto-focus feature.
The fixed-focus switch function enables the application program to switch the focus to suit the
distance to the object being captured.
The auto-focus function automatically adjusts the focus to suit the distance of the object being
captured. Executing the auto-focus function in preview mode automatically adjusts the lens position
to focus the camera. Auto-focus adjusts the preview screen's fixed area (focus area) so that it
comes into focus. When the focus area and the focus frame display functions are enabled, a frame
known as the focus frame appears on the preview screen. The focus frame appears green when the
auto-focus has been successful. When the auto-focus function is not selected or when it is
unsuccessful, the focus frame turns to red. When capturing a still image upon successful auto-focus,
and when preview stops, the focus frame returns to red.
Autofocus may fail in extremely bright or dark places, and with low-contrast subjects. If autofocus
fails, use the fixed-focus switch function.
Item
Fixed-focus switch function
Auto-focus function
Focus frame display
Setting parameters
Flash Off (the default mode), Flash On, Auto Flash
Setting parameters
1 (close range) – 10 (long range) (switch between
10 levels)
No settings required
Disabled (default)/ Enabled
80