Casio IT-G500 Series Software Manual page 107

(3) TCP/IP settings
Item
DHCP
*1
IP address
*1
Subnet mask
Default gateway
DNS1
DNS2
WINS1
WINS2
*1 This can be specified if DHCP is disabled.
(4) Setting storage
The storage locations for wireless LAN settings are as follows.
Storage location
Item
INI file This file is created when the Casio
wireless LAN setting tool is used for
setup
Registry These are settings for the operation
of the wireless LAN drivers and
supplicants. This registry is set with
the MS standard tool or the Casio
wireless LAN setting tool
E2PROM This is used for settings which must
be retained even through a user
disk clear, such as custom
country-specific settings.
*2 The registry reverts to shipped defaults, but on startup the settings are re-configured from the
INI file, so effectively the settings are retained.
Backup/restore
Item
INI file
Registry
E2PROM
*3 The registry itself is copied, but the wireless LAN setting information is encrypted uniquely for
each terminal, so the information cannot be read. Therefore, information set with standard MS
configuration cannot be copied.
Specify "Enable" or "Disable" for DHCP.
Set the IP address.
Set subnet mask.
*1
Set the default gateway.
Set primary DNS server address.
Set secondary DNS server address.
Set primary WINS server address.
Set secondary WINS server address.
Content
Own Other
terminal terminal
Yes Yes
*
３
Yes No
Yes Yes
Content
When
shipped
None Settings
retained
Default Settings
settings retained
only
None Settings
retained
107
Default
DHCP
Reset Full
reset
Settings
retained
When
shipped
*2
Settings
retained
User
disk
clear
When
shipped
When
shipped
Settings
retained