Led Control - Casio IT-G500 Series Software Manual

LED control

2.5.1
The main functions are as follows.
For details of the library, refer to the System Library Manual.
(1) User notification LED
This is used for alarm notification, etc. Use as the scanner scanning LED has priority for lighting.
This LED can be controlled from the OS, which can make it light for a set period.
Item
Blink interval
Time continuously ON
Note) This function is only usable on WEC7 models.
(2) Scanner scanning LED
This is used for notification of a scanning result.
Item
Scanning successful
Scan error
(3) W-LAN connection status LED
This is used for notification of W-LAN wireless connection status.
Item
Connection established
via SS wireless
Time continuously ON
Use as the scanner scanning LED has priority.
–
W-LAN wireless, W-WAN, and GPS all control the LED in the same color category, so the have
–
the same lighting specification.
Specification
Blinking red, on for 1 second, off for 2 seconds
30 minutes (off when VDET is detected.)
Specification
On in green for a specified period of time, then off.
On in red for a specified period of time, then off.
Specification
On in orange for 1 second, off for 2 seconds
32
Remarks
Attribute
L_SCANOK
L_SCANERR
Attribute
L_WLAN