Casio IT-G500 Series Software Manual page 220

Item Description
No. Item
1 GPS Fix Mode
2 A-GPS Mode
Supl Server URL/
3
IP Address
4 Port
5 Inifile comment
6 Advance Settings
7 Apply
8 Cancel
－ [OK] button
Operation
Select A-GPS operation mode.
 Stand alone : Without A-GPS
 MS-Based : MS-Based mode
 MS-Assisted : MS-Assisted mode
Select A-GPS execution method.
 Control Plane : Control Plane mode
 User Plane : User Plane mode
Note : When you select "MS-Based" or "MS-Assisted" in GPS
Fix Mode, this setting item will be appeared.
Specify URL or IP address for connection to Supl server.
-
When you select "User Plane" in A-GPS Mode, this setting is available.
-
Available to set until 110 byte
-
Error if no setting
Specify Port number for connection to Supl server
-
When you select "User Plane" in A-GPS Mode, this setting is available.
-
Available to set from 0 to 65535.
-
Available to skip
-
Error if value is out range.
Specify comment to write into ini file.
-
Available to set until 100 byte.
-
Available to skip
Display Accuracy value (Satellite receive threshold value of
GPS running) setting menu.
-
Specify decimal number over 0 (x => 0).
-
Error if no setting or under 0 value.
Setting value will be available.
Exit this program.
Exit this program.
220