Information - E+E Elektronik EE29 Series Manual

Network address:
i
Type:
Humidity Calibration Date:
i
Temperature Calibration Date:
i
Productionnumber:
Version / Revision:
Configuration software
5.5

Information

Here you will find information on the selected transmitter.
Each measuring transmitter is assigned a unique network address at the factory
for precise identification within the network.
Note:
This identification number is also issued for transmitters of the EE29 series,
although transmitter s of this series are not network compatible.
Specifies whether the transmitter belongs the EE29 or EE31 series.
Provides information on the date of the last humidity calibration, but only where this
was performed using the configuration software.
Note:
Manual calibration processes performed directly on the circuit board are not
recorded!
Provides information on the date of the last temperature calibration, but only where
this was performed using the configuration software.
Note:
Manual calibration processes performed directly on the circuit board are not
recorded here!
Used to track the manufacturing data of the transmitter.
Provides information on the software version implemented in the transmitter
(internal).
34