Display Module / Option - E+E Elektronik EE29 Series Manual

5.2

Display module / Option:

1. MEASURAND
SI
RH Rel. humidity
T Temperature
h Enthalpy
r Mixture ratio
dv Absolute humidity
Tw Wet-bulb temperature
Td Dew-point temperature
e Water vapour partial pres.
4. MIN / MAX FUNCTION:
Transmitters of the EE29/31 series can display the highest and lowest measured value
measured since the last reset.
Highest measured value:
1. Select the desired measurand.
MAX
2. To display the maximum value of the selected measurand, press the ∆ button for at
RH: 63.0%
least five seconds.
3.1.To reset the instrument to its normal operating status, press the ∆ button once again
for five seconds.
3.2.If both buttons are pressed for at least five seconds while the maximum value is
displayed → the "MAX" symbol disappears → the maximum value will be deleted
(Reset).
Lowest measured value:
1. Select the desired measurand.
MIN
2. To display the minimum value of the selected quantity, press the ∇ button for at least
RH: 63.0%
five seconds.
3.1.To reset the instrument to its normal operating status, press the ∇ button once again
for five seconds.
3.2.If both buttons are pressed for at least five seconds while the minimum value is
displayed → the "MIN" symbol disappears → the minimum value will be deleted
(Reset).
REL1
RH: 38.57%
:
2. UNITS
SI
%
degC
kJ/kg
g/kg
g/m³
degC
degC
mbar
9
1. Measurand
2. Units
3. Measurand selection and
4. Min/Max function
5. Measured values
6. Status line
3. MEASURAND SELECTION:
:
US
%
°F
ftlbf/lb
gr/lb
gr/ft
°F
°F
psi
Press the ∆ or
EE29
∇ button to
select the
desired
physical
EE31
quantity.
Hardware