Overview; How To Set-Up A New Transmitter; How To Read The Configuration Of A Transmitter; How To Save The Configuration In A Transmitter - E+E Elektronik EE29 Series Manual

6.

OVERVIEW

6.1

How to set-up a new transmitter?

Menu "File" --> "New Workspace"
Assign a name to the file and select the location to save the file
Menu "Group" --> "New Group"
Assign and add a name, then click on "Finish"
Menu " Transmitter" --> "New Transmitter" or Button "New Transmitter"
Select the group for the transmitter using the pull-down menu "Group."
If the transmitter is from the EE31 series and will belong to a transmitter network,
then select the box "Network" and enter the network address assigned by E+E
(can be found on the housing label) in the "Network Address" field.
Specify the COM port (serial interface) of the PC / Notebook in the pull-down
menu "Interface".
Enter the name for the transmitter in the "Name" field.
Complete the "New Transmitter" process by clicking on the button "Add".
6.2

How to read the configuration of a transmitter?

The current configuration of the selected transmitter can be read by
clicking on the button "Read Transmitter" or by selecting "Transmitter" --> "Read
Transmitter."
If the configuration is already loaded, the configuration data in the Index- index
cards can be modified or adapted.
6.3

How to save the configuration in a transmitter?

A modified configuration in the Index - index cards can be saved to the selected
transmitter by clicking on the button "Save Transmitter" or by selecting
"Transmitter" --> "Save Transmitter."
35
Configuration software