Information - E+E Elektronik EE29 Series Manual

Preferences:
Delete transmitter:
Read:
Read All:
i
Write:
Write All:
i
Warm Start:
Version:
Configuration software
Displays the preferences for all transmitters that have been set-up.
The preferences may also be changed here.
Deletes from the tree structure the selected transmitters, or the selected groups.
Reads and displays the configuration parameters of the selected transmitter.
Reads the configuration for all transmitters.
Note:
Only those parameters that have the same value for all transmitters of the network
will be displayed. Other values are shaded and can not be selected or changed.
Writes the current configuration into the selected transmitter.
Writes the current configuration to all selected transmitters.
Set the configuration for a transmitter, then select the appropriate network in the
tree and write the configuration all transmitters of the target group using the
command "Write All."
Resets and restarts the microprocessor of the selected transmitter.
3.5

? - Information

Displays the version number of the EE29/31 software currently installed and the
contact information for E+E Elektronik.
28