Physical Quantity:
Switching Point High:
Hysteresis:
Configuration software
5.2
Relay
It is used to set both optional alarm outputs.
Selects the physical quantity for each alarm output.
Sets the high switching point.
Sets the switching hysteresis that should be maintained each time the signal falls
below the upper switching threshold.
Ausschaltpunkt
Hysterese
switchingoff
8%
62
30
obere Schaltschwelle
switchingon
[%, °C, kj/kg,
70
g/kg, g/m³, mbar,...]
Schaltpunkt
switching point