Load:
Save:
New Workspace:
Open Workspace:
Save Workspace:
i
Select:
use / do not use:
i
Configuration software
3.
ICONS ON THE TOOLS BAR
3.1
File
Loads a file with a saved transmitter configuration.
Saves the current transmitter configuration in a file.
Opens a file for a new tree (new network).
Opens existing trees (networks).
Saves the current trees (networks) in an archive file.
Note:
The functions "Save Workspace" and "Open Workspace" apply to the tree
structure only, not to the configurations of individual transmitters! Therefore only the
network structure is saved. Transmitters configurations must be reloaded using the
command "Read All Transmitters."
3.2
Interfaces
Selects the serial interface (COM port) for communication with the transmitters.
Following functions are available:
Marked COM ports are greyed out and deactivated for the configuration software
(e.g., COM for integrated Notebook Modem).
Note:
A disabled interface (shaded = do not use), can be enabled by clicking on the
"use" button.
26