Epson AcuLaser C2800 Service Manual page 91

AcuLaser C2800/C2800D/C3800/C3800D
FIP 1-5 Paper Jam A B
Possible parts that caused the error
CLUTCH ASSY PH REGI
DRIVE ASSY PH
DRIVE ASSY MAIN
ROLL REGI RUBBER
Troubleshooting
Step Check
Check the paper feed path
1
Is there any foreign material, deformation, or
dirt on the path?
Check the Paper Feed Rollers
2
Are the paper feed rollers (ROLL REGI
RUBBER/ROLL REGI METAL) installed
correctly?
Check the Paper Feed Rollers
3
Are the paper feed rollers (ROLL REGI
RUBBER/ROLL REGI METAL) worn?
Check the installation of the TRANSFER
4
UNIT
Is the TRANSFER UNIT installed correctly?
Check the TRANSFER UNIT
5
Is the TRANSFER UNIT deformed or
damaged?
Check the operation of the CLUTCH ASSY
6
PH REGI
Check the CLUTCH ASSY PH REGI with
reference to FIP 2-5 (p.123).
Was the trouble fixed?
Check the operation of the DRIVE ASSY PH
7
Check the DRIVE ASSY PH with reference to
FIP 2-6 (p.123).
Was the trouble fixed?
TROUBLESHOOTING
ROLL REGI METAL
TRANSFER UNIT
FUSER UNIT
PWBA MCU
Yes No
Clean or replace Go to Step [2].
the part.
Go to Step [3]. Reinstall the
rollers correctly.
Replace the Go to Step [4].
rollers.
Go to Step [5]. Reinstall the
TRANSFER
UNIT correctly.
Replace the Go to Step [6].
TRANSFER
UNIT. (p.268)
End of procedure Go to Step [7].
End of procedure Go to Step [8].
Engine-related Trouble FIP
Step Check
Check the operation of the Main Motor in
8
the DRIVE ASSY MAIN
Check the Main Motor in the DRIVE ASSY
MAIN with reference to FIP 2-7 (p.124).
Was the trouble fixed?
Check the operation of the Exit Sensor in the
9
FUSER UNIT
Check the Exit Sensor in the FUSER UNIT with
reference to FIP 2-11 (p.126).
Revision C
Yes No
End of procedure Go to Step [9].
--- ---
91
Confidential