Epson AcuLaser C2800 Service Manual page 150

AcuLaser C2800/C2800D/C3800/C3800D
FIP-P14 TONER IS NOT FUSED TO THE PRINT MEDIA
Symptom
The printed image is not sufficiently fixed to the paper.
If you touch or rub the printed images, the toner can be
easily removed.
Possible Parts
Before starting troubleshooting, inspect the paper feed path of the printer paper. Check
the paper feed path for metal staples, paper clips, paper scraps, and other foreign
matter.
Step Check
Check the IMAGING CARTRIDGE (Y/M/
1
C/K)
Is the specified IMAGING CARTRIDGE (Y/
M/C/K) installed correctly?
Check the paper
2
Is it a new standard paper free from moisture?
Check the installation of the FUSER UNIT
3
Reinstall the FUSER UNIT and make a test
print. Are images printed normally?
Check after replacing the FUSER UNIT
4
Replace the FUSER UNIT (p.298)
test print. Are images printed normally?
TROUBLESHOOTING
Symptom / Possible Parts
IMAGING CARTRIDGE (Y/M/C/K)
FUSER UNIT
PWBA MCU
BOARD ASSY, MAIN
Yes
Go to Step [2]. Replace the
specified
IMAGING
CARTRIDGE (Y/
M/C/K).
Go to Step [3]. Replace it with a
new standard
paper free from
moisture.
End of procedure Go to Step [4].
End of procedure Replace the
PWBA MCU.
and make a
(p.343)
Print Quality Trouble FIP
FIP-P15 COLORS ARE DISPLACED
Before starting troubleshooting, inspect the paper feed path of the printer paper. Check
the paper feed path for metal staples, paper clips, paper scraps, and other foreign
matter.
Step
No
Check after turning the power OFF and ON
1
After turning the power OFF and ON, run test
print. Are images printed normally?
(p.271)
Symptom / Possible Parts
Symptom
The printed Yellow or Black image does not accurately
overlap the Cyan or Magenta image, and is out of
position.
Possible Parts
BOARD ASSY, MAIN
PWBA MCU
Check Yes
End of procedure Replace the
Revision C
No
BOARD ASSY,
MAIN. (p.337) or
the possible parts
one by one.
150
Confidential