Epson AcuLaser C2800 Service Manual page 386

EPSON AcuLaser C2800/C2800D/C3800/C3800D
WRITING METHOD
The method for writing USB ID varies according to the conditions of the main board. Be sure to figure out the appropriate method with reference to the following table.
For details on how to write the ID, follow the instructions shown in the program.
Main Board Condition
Communication between the computer
and the main board is impossible
Communication between the computer
and the main board is possible
Store optional ID
CONFIRMING THE ID
When the writing USB ID is completed, print a status sheet to confirm that the serial number printed on the sheet is identical to that on the label attached to the printer.
(Refer to "7.4.1 Status Sheet" (p.413))
ADJUSTMENT
Previous ID Check
The previous ID can be confirmed with a printed paper such
as a status sheet.
The previous ID cannot be confirmed by any means.
(The previous ID can be read from the previous main board.) OLD ID Retrieval/Restore
Store auto-generated NEW ID
Table 5-2. Writing Method
Writing Method
(Button Name)
Store optional ID
Store auto-generated NEW ID
Adjustment
Description
Enter the previous ID to write it into new main board.
The program automatically creates new ID from the serial
number of the printer. Write the ID into new main board.
Retrieve the ID from the old board, and enter the ID into
new board.
OLD ID Retrieval/Restore
Revision C
386
Confidential