AcuLaser C2800/C2800D/C3800/C3800D
A B C
CLUTCH ASSY FEED OPT
3)
2)
1. Disconnect the connector (P/J4213) on the harness of the CLUTCH ASSY FEED OPT.
2. Loosen the clamp that secure the harness of the CLUTCH ASSY FEED OPT, and remove the
harness.
3. Remove the KL-ring that secures the CLUTCH ASSY FEED OPT to the SHAFT FEED OPT.
4. Remove the CLUTCH ASSY FEED OPT from the SHAFT FEED OPT.
DISASSEMBLY/REASSEMBLY
CLUTCH ASSY FEED OPT
4)
1) (J4213)
Kmy03234EA
Disassembly/Reassembly
A B C
2)
2)
3)
1. Disconnect the connector (P/J4212) on the harness connected to the FEEDER ASSY UNIT OPT, and
pull out the connector through the hole in the FRAME ASSY OPT.
2. Remove the four screws (silver, self-tapping, 8 mm) that secure the FEEDER ASSY UNIT OPT to
the FRAME ASSY OPT.
3. Release the two tabs that secure the FEEDER ASSY UNIT OPT to the FRAME ASSY OPT, and
release the two guide pins from the hole in the FRAME ASSY OPT.
Revision C
FEEDER ASSY UNIT OPT
2)
2)
3)
1) (J4212)
Kmy03241EA
NEXT>>
367
Confidential