Epson AcuLaser C2800 Service Manual page 149

AcuLaser C2800/C2800D/C3800/C3800D
FIP-P13 PRINTED PAGE IS WRINKLED, FOLDED, OR TORN
Symptom
Printed page is wrinkled, folded, or torn.
Possible Parts
Before starting troubleshooting, inspect the paper feed path of the printer paper. Check
the paper feed path for metal staples, paper clips, paper scraps, and other foreign
matter.
Step Check
Check the paper
1
Is it a new standard paper free from moisture?
Installation state of the paper cassette and
2
papers
Reload the papers against the paper guide, and
run test print. Are images printed normally?
Check the paper feed path
3
Is there any dirt or foreign material on the path?
TROUBLESHOOTING
Symptom / Possible Parts
ROLL ASSY RETARD
ROLL ASSY FEED MSI
ROLL ASSY TURN
ROLL ASSY FEED (Feed Roll/Nudger Roll)
ROLL ASSY FEED (Retard Roll)
ROLL ASSY FEED (OPT)/(Feed Roll/Nudger Roll)
ROLL ASSY FEED (OPT)/(Retard Roll)
ROLL REGI METAL
ROLL REGI RUBBER
FUSER UNIT
ROLL ASSY DUP-1
ROLL ASSY DUP-2
Yes
Go to Step [2]. Replace it with a
new standard
paper free from
moisture.
End of procedure Go to Step [3].
Clean the paper Go to Step [4].
feed path or
remove the
foreign material.
Print Quality Trouble FIP
Step
Check the Paper Feed Rollers
4
1. Are the rollers on the paper feed path not
soiled, damaged or worn?
2. Are those rollers installed correctly?
Check the belt surface of the TRANSFER
5
UNIT
Is the belt surface recessed or deformed?
Check the installation of the TRANSFER
6
UNIT
Reinstall the TRANSFER UNIT and make a
test print. Are images printed normally?
Check the installation of the FUSER UNIT
7
Reinstall the FUSER UNIT and make a test
print. Are images printed normally?
No
Check Yes
Go to Step [5].
Replace the
TRANSFER
UNIT. (p.268)
End of procedure Go to Step [7].
End of procedure Replace the
Revision C
No
Clean the rollers
and reinstall them
correctly, or
replace them with
new ones.
Go to Step [6].
FUSER UNIT.
(p.298)
149
Confidential