Epson AcuLaser C2800 Service Manual page 391

EPSON AcuLaser C2800/C2800D/C3800/C3800D
AcuLaser C3800/C3800D
Product Name
High capacity imaging cartridge Yellow
Magenta
Cyan
Black
Standard capacity imaging cartridge Yellow
Magenta
Cyan
TRANSFER UNIT
FUSER UNIT (110-120 V)
FUSER UNIT (220-240 V)
* : Average values for A4, continuous printing at 5% image occupancy ratio.
PRODUCTS THAT REQUIRE PERIODIC REPLACEMENT
Product Name Configuration
Retard roller
KIT ROLL ASSY Feed roller
FEED SEC
Nudger roller
HOLDER ASSY Retard roller
RETARD MSI
MAINTENANCE
Table 6-2. Consumable Products
Product
Configuration
Toner hopper
Development roller
Photoconductor
Waste toner box
Transport belt
Bias transfer roller
Waste toner box
Heat roller
Quarts lamp (for 120 V)
Heat roller
Quarts lamp (for 230 V)
Table 6-3. Products that Require Periodic Replacement
Service Life
Replacement Massages
(printable pages)
200,000 ---
200,000 ---
200,000 ---
30,000 ---
Consumable Products/Products that Require Periodic Replacement
*
Service Life Replacement
Code (printable pages) Massage
Replace Toner Y
1124 9,000
1125 9,000 Replace Toner M
Replace Toner C
1126 9,000
1127 9,500 Replace Toner K
1128 5,000 Replace Toner Y
Replace Toner M
1129 5,000
1130 5,000 Replace Toner C
3024 100,000 Replace Transfer Unit
3026 100,000 Replace Fuser
3025 100,000
Retard, feed, and nudger rollers are exactly the same parts, their names vary according to the
installation positions. These rollers are provided in a set as an ASP by the name of "KIT ROLL
ASSY FEED SEC", be sure to replace these rollers at one time.
Replacement messages do not appear on the panel.
Replace these rollers if paper is jammed, skewed, wrinkled, folded or torn at frequent intervals.
Replacement messages do not appear on the panel.
Replace the roller if paper is jammed, skewed, wrinkled, folded or torn at frequent intervals.
Remark
Outer dimensions of high capacity imaging
cartridge and standard capacity imaging
cartridge are the same.
When the error LED is flashing, you can
continue printing in monochrome by pressing
the [Start/Stop] button.
Printing is impossible when the error LED is lit.
Printing is impossible.
Replace the unit immediately.
The FUSER UNIT has reached the end of its
service life. Replace the unit immediately.
You can continue printing, but print quality is
not guaranteed while this message is displayed.
Remark
Confidential
Revision C
391