Epson AcuLaser C2800 Service Manual page 353

AcuLaser C2800/C2800D/C3800/C3800D
A B C D E
COVER PWBA DUP 1)-2
1)-1
1. Release the four tabs that secure the COVER PWBA DUP to the FEEDER ASSY DUP, and remove
the COVER PWBA DUP.
DISASSEMBLY/REASSEMBLY
COVER PWBA DUP
1)-1
1)-1
1)-1
Kmy03225EA
Disassembly/Reassembly
A
2)
3)
1)
3)
1)
1)
1)
4)
Kmy03222EA
1. Release the four tabs that secure the HOLDER SENSOR DUP to the FEEDER ASSY DUP, and
remove the HOLDER SENSOR DUP.
2. Disconnect the connector (P/J4301) of the SENSOR PHOTO:DUP/JAM.
3. Expand the left and right edges of the HOLDER SENSOR DUP, pull out the shaft of the
ACTUATOR DUP, and remove the ACTUATOR DUP together with the SPRING SENSOR DUP.
Be sure to hitch the SPRING SENSOR DUP on the ACTUATOR DUP and the HOLDER
SENSOR DUP.
4. Remove the SPRING SENSOR DUP from the ACTUATOR DUP.
Revision C
ACTUATOR DUP
FEEDER ASSY DUP
353
Confidential