Epson AcuLaser C2800 Service Manual page 404

EPSON AcuLaser C2800/C2800D/C3800/C3800D
PRINTER ADJUST MENU
Menu
Normal 0 ~ 1
Thick 0 ~ 1
Coated 0 ~ 2
Transfer Normal *1*2 -3 ~ 0 ~ 3
*1*2
Transfer Label -3 ~ 0 ~ 3
*1*2
Transfer Thick -3 ~ 0 ~ 3
*1*2
Transfer ExtraThk -3 ~ 0 ~ 3
Transfer Trnsprnc *1*2 -3 ~ 0 ~ 3
Transfer Envelope *1*2 -3 ~ 0 ~ 3
*1*2
Transfer SemiThk -3 ~ 0 ~ 3
*1*3
Transfer Coated -3 ~ 0 ~ 3
*4*5
Temp Normal -6 ~ 0 ~ 6
Temp Label *4*5 -6 ~ 0 ~ 6
Temp Thick *4*5 -6 ~ 0 ~ 6
*4*5
Temp ExtraThk -6 ~ 0 ~ 6
*4*5
Temp Trnsprnc -6 ~ 0 ~ 6
*4*5
Temp Envelope -6 ~ 0 ~ 6
Temp SemiThk *4*5 -6 ~ 0 ~ 6
*3*4
Temp Coated -6 ~ 0 ~ 6
*6
Charger 0 ~ 3
FeedOffset -3.5 ~ 0.0 ~ 3.5
Scan Offset -3.5 ~ 0.0 ~ 3.5
Feed Offset2 -3.5 ~ 0.0 ~ 3.5
Scan Offset2 -3.5 ~ 0.0 ~ 3.5
Calibration Execute
APPENDIX
Option
Selects the paper type to be notified to the engine when Normal is selected for paper type.
0: PlainPaper-L (full speed)
Selects the print speed to be notified to the engine when Thick is selected for paper type.
0: Normal mode
Selects the paper type to be notified to the engine when Coated is selected for paper type.
0: CoatedPaper-H (half speed)
Selects the transfer current when Normal is selected for paper type.
Selects the transfer current when Label is selected for paper type.
Selects the transfer current when Thick is selected for paper type.
Selects the transfer current when ExtraThk is selected for paper type.
Selects the transfer current when Trnsprnc is selected for paper type.
Selects the transfer current when Envelope is selected for paper type.
Selects the transfer current when SemiThk is selected for paper type.
Selects the transfer current when Coated is selected for paper type.
Selects the fuser temperature when Normal is selected for paper type.
Selects the fuser temperature when Label is selected for paper type.
Selects the fuser temperature when Thick is selected for paper type.
Selects the fuser temperature when ExtraThk is selected for paper type.
Selects the fuser temperature when Trnsprnc is selected for paper type.
Selects the fuser temperature when Envelope is selected for paper type.
Selects the fuser temperature when SemiThk is selected for paper type.
Selects the fuser temperature when Coated is selected for paper type.
Specifies electrostatic potential for printing.
Adjusts offset in sub-scanning direction in printing.
Adjusts offset in main scanning direction in printing.
Adjusts offset in sub-scanning direction when printing on back side of paper in duplex printing.
Adjusts offset in main scanning direction when printing on back side of paper in duplex printing.
Executes AIDC (Auto Image Density Control).
Control Panel Special Features
Function
1: PlainPaper-H (full speed)
1: Half speed mode
1: CoatedPaper-M (half speed) 2: CoatedPaper-L (full speed)
Revision C
404
Confidential