Disassembly/Reassembly; How To Read This Chapter - Epson AcuLaser C2800 Service Manual

AcuLaser C2800/C2800D/C3800/C3800D

4.4 Disassembly/Reassembly

4.4.1 How to Read this Chapter

PAGE CONFIGURATION
Opening page
Section Title
Shows title of the section.
AcuLaser C2800/C2800D/C3800/C3800D
4.4 DISASSEMBLY/REASSEMBLY
4.4.1 COVER (PART 1)
DISASSEMBLED PARTS
Table 4-1. List of Disassembled Parts
Name Guide
A
COVER REAR
COVER EXTENSION 1
B
COVER EXTENSION 2
C
COVER SIDE IF
DISASSEMBLY/ASSEMBLY DISASSEMBLY/REASSEMBLY
Name/Guide
Lists part names in Name column, whose
disassembly procedures are described in the
section. Refer to alphabets in Guide column
to disassemble each part.
DISASSEMBLY/REASSEMBLY
Revision A
LOCATION
COVER REAR
COVER EXTENSI ON 1
COVER EXTENSI ON 2
COVER SIDE IF
174
Location
Shows locations of each
part.
Disassembly/Reassembly
Main page
Guide
Guide to indicate the procedual steps.
AcuLaser C2800/C2800D/C3800/C3800D
A
COVER REAR
COVER REAR
1)
1)
1)
1)
2)
Kmy03003EA
1. Remove the four screws (silver, self-tapping, 10 mm) that secure the COVER REAR to the main unit.
2. Remove the COVER REAR from the main unit.
DISASSEMBLY/ASSEMBLY DISASSEMBLY/REASSEMBLY
Procedure
Shows disassembly procedure.
Reassemble parts in the reverse
order of their removal.
Revision C
Part Name
Shows part to be disassembled or
operation to be performed in the column.
Revision A
COVER EXTENS ION 1
B
COVER EXTENS ION 2
COVER EXTENSION 1
2)-2
3)
2)-1
Kmy03007EA
1. Open the COVER EXTENSION 1.
2. With the center of the COVER EXTENSION 1 bowed a little, pull out the protrusion on one side of
the COVER EXTENSION 1 through the hole in the COVER TOP.
3. Pull out the protrusion on the other side of the COVER EXTENSION 1 through the COVER TOP,
and remove the COVER EXTENSION 1.
NEXT>>
175
Next
Procedure continues
on the next page.
177
Confidential