Clear Setup Mode - GRAPHTEC CE5000 Series Service Manual

8.3

Clear Setup Mode

This mode returns all the conditions to their default settings.
How to clear the setups
(1) Turn on the power while pressing the UP ARROW key to display the menu shown below.
HL metric ENG
(2) Select the default mode using the UP ARROW or DOWN ARROW key.
HL metric ENG
HL inch ENG
GL metric KANA
(3) Press the ENTER key to store the setting.
Wait a few moments for the plotter to start the initialization routine.
(4) Turn off the power to the plotter when the initialization routine has finished.
CE5000-UM-251-9370
HP-GL, Metric unit, English
HP-GL, Inch unit, English
GP-GL, Metric unit, Japanese
8-3
8 SERVICE MODES