Programming - Omron CK3M-CPU 1 Series Application Manual

6
Type the #4 j=0 command in the Power
PMAC IDE Terminal and confirm that
Gate3[1].Chan[1].SerialEncDataA=0 is
displayed.
7
Confirm that the guide laser light is out-
put to the center of the XY table.
8
Type the #5 j={Position} command in
the Power PMAC IDE Terminal and
confirm that the spot diameter of guide
laser light is appropriate.
9
Type the GuideLaser=0 command in
the Power PMAC IDE Terminal and
confirm that guide laser light is not out-
put.
3-7-3

Programming

Program the settings of the laser oscillator.
1
In the Solution Explorer, right-click Global
Includes under PMAC Script Language
and select Add – New Item....
Application Guide Laser Application (O052)
3 Connection Procedures
3
3-53