Omron CK3M-CPU 1 Series Application Manual page 36

3 Connection Procedures
16
Click the Plot Data button.
17
Confirm that the position of each axis is
displayed as shown on the right.
18
If either Motor[3] Cmd Position or Mo-
tor[4] Cmd Position exceeds the maxi-
mum or the minimum command value
of the Galvo Scanner, open the global
definitions.pmh file and edit the
KdgainX and KdgainY settings. Then,
perform steps 7 to 17 again.
19
If there is no problem with the filter re-
sponse in step 18, right-click the
VirtualMotor.pmh file in the Solution
Explorer and select Delete.
3-20
Application Guide Laser Application (O052)