Second Fold Table Installation; Feed Table Extension - Martin Yale 2051 Installation Operation & Maintenance

Martin Yale 2051 Folder
®
(2051.09.03.16.11.40)

1.4.2 Second Fold Table Installation

To install the second fold table, refer to Figure 3.
Step 1: slide the front slot opening of the fold table onto the
inner set of pins (closest to the folding rollers) with a light to
moderate amount of pressure.
Step 2: lower the fold table onto the outer set of pins with a
light amount of downward pressure as shown. There will be
a slight snapping action as the fold table drops into the
detent position.
1.5

Feed Table Extension

Figure 3
Your folder comes with 2 Feed Table Extensions. One of
the Extensions is used on the Exit Conveyor, and the other
extension is used on the Feed Table. Both extensions are identical and can be used on either the Feed
Table or the Exit Conveyor.
To install the Extension onto the Feed Table, align the locking tabs of the Extension with the slots in the
Feed Table as shown in .
Figure 4
Squeeze the Feed Table and Extension together nearest the tabs and slots until the 2 pieces snap
together.
To install the Extension onto the Exit Conveyor, align the tabs on the Extension with the slots provided
in the Exit Conveyor as shown in . No force is required to install the Extension onto the Exit
Figure 5
Conveyor – gravity will hold the Extension in place.
Figure 5
Figure 4
Revision 3.0 Martin Yale Industries, Wabash, Indiana, USA 260-563-0641 Page 8 of 52