Manual Mode; Custom Folding Jobs; Custom Paper Lengths; Custom Fold Table Settings - Martin Yale 2051 Installation Operation & Maintenance

Martin Yale 2051 Folder
®

4 Manual Mode

The folder is in "Manual Mode" if none of the Fold Type lights are illuminated. Manual Mode is entered
if the position of either Fold Table is manually change by a more than 1/4 of an inch from a Standard
Fold position. Doing so will turn off all Standard Fold lights, indicating that the folder has been placed
into "Manual Mode". Also, the top line of the LCD Display will state "Custom Fold Set".
When in Manual Mode, the folder assumes that the operator knows what they want for a desired fold,
and therefore, it is completely up to the operator to specify the paper length and set both Fold Table
positions. The position of the Stack Wheels will still automatically adjust based on the paper size and
Fold Table positions.
When in Manual Mode, it is still important to set the proper paper length as this helps to control feeding,
and insures maximum operating efficiency.

5 Custom Folding Jobs

5.1

Custom Paper Lengths

Your folder has the necessary intelligence to calculate the proper settings for the Fold Tables and the
Stack Wheels for all of the pre-programmed fold types for any given paper length. If a pre-programmed
fold type is selected, and you enter a custom paper length, the fold tables and stack wheels will
automatically be configured to produce that fold.
To specify a custom paper length, press the Paper Length button. Using the number buttons, enter a
valid paper size value (see the folder specifications on the cover of this document for valid paper sizes),
and press the Enter button to save this value.
5.2

Custom Fold Table Settings

When a custom Fold Table setting is entered, the folder enters a "Manual" mode where
you must specify everything manually. You may use the pre-programmed paper sizes, if
you wish.
When the folder is in Manual mode, the "Other" light will be illuminated, indicating that
you are creating a fold "Other" than the standard, pre-program fold types.
5.3

Custom Fold Programs

The 2051 folder can store up to 10 different custom fold programs. Custom programs store the position
of both Fold Tables, Paper Length, Folder Speed, Quantity, and Batch Quantity. The location of the
Stack Wheels is calculated automatically when the program is recalled, and therefore, are not part of
Custom Fold Programs.
Once a program is stored into a memory location, it cannot be deleted. Programs can only be
overwritten with another program. Programs are maintained in memory even if the power is turned off
or power is removed.
5.4

Storing a Program

To store a program, press the "STORE" button, then press one of the number buttons (0-
9) to specify a storage location.
Each number button is a separate program storage location.
Revision 3.0
Custom Fold Set
Qty Done =
Martin Yale Industries, Wabash, Indiana, USA 260-563-0641
0
Figure 19
(2051.09.03.16.11.40)
Page 14 of 52