Display And Fold Set-Up; Fold Styles - Martin Yale 1701 Instruction Manual

Fold Type
Z-Fold
Letter Fold
Half Fold
Double Parallel Fold
Gate Fold
3.0 Display
Before attempting set-up of the Model 1701 folder, take a few moments to review the buttons on the Model 1701
touch pad display and their functions. The Model 1701 touch pad buttons are indicated below along with their func-
tion (Fig. 10).
A
B
(A)-Paper Size Select Key - Press this key to select the appropriate paper size. The selected paper size will be indi-
cated by a lit LED.
(B)-Fold Style Select Key - Press this key to select the fold style desired. Press the button until the desired fold is
indicated by its LED.
(C)-2nd Fold Table Paper Stop Keys - Allows the user to move the 2nd fold table paper stop either direction. This
function is used to obtain fold styles that are not one of the (5) factory pre-set folds. When either of these keys are
pressed, the folder automatically switches to 'custom fold' mode. These keys work on a 2-speed system. When the
key is pressed for a short time, the paper stop moves at a slower speed for fine tuning. When a key is pressed and
held in place, the paper stop moves at a faster speed.
(D)-1st Fold Table Paper Stop Keys - Same function as (c) but for the 1st fold table.
(E)-Pulse Key - Makes the folder run while the button is pushed and held in place. Useful for purposes such as mul-
tiple sheet sets where the manual feed feature is being utilized.
(F)-Run Key - Makes the folder start running if at rest, or will stop the folder if it is running. The Model 1701 is
equipped with an auto-off feature making manual shut down at the end of a run unnecessary. Once all the paper
clears the folding rollers, the folder will run for a few moments to clear the exit conveyor then automatically shut off.

3.1 Fold Styles

Before attempting to set-up a fold, the operator should familiarize themselves with the five designated fold style icons
provided on the rulers located on each fold table (Fig. 11). These icons are arranged in columns on the feed table
Stacking Wheel Placement Chart
8.5" X 11"
Letter
B
A or B
B
A
B
C
A4
Fig. 10
(4)
Paper Size
8.5" X 14" 297mm X 210mm
Legal
B
-
C
B
-
D
CUSTOM
FOLD
A4
B
A or B
B
A or B
B
E
F