Fold Tables - Martin Yale my OFFICE PRODUCTS P7500 Instruction Manual

The Front and Back Fold Tables should come already inserted in the machine. If
you need to remove them for jam removal, insert them back into the machine as
shown in Figures 7 and 8.
•
Slots on the ends of both Fold Tables fit onto the 2 silver-colored pins inside the
machine (Figure 6).
•
The Fold Tables should rest on top of the silver tie rods (see Figure 6).
•
The Tables should go into the machine open end first (exception: When doing a
half fold, the Back Fold Table should go in closed end first. See Half Fold section
on the next page.)
•
Hint: Many users find it easier to install the fold tables while looking at them
from the bottom (as seen in Figure 6).
Adjusting the Fold Tables
Note: The RapidFold 110v model comes factory preset to fold an 8.5" x 11" sheet of
paper into a letter fold appropriate for a standard business envelope. The 220v
models are factory-preset to fold an A4 sheet of paper into a letter fold.

Fold Tables

Figure 7: Front Fold Table
8
Figure 8: Back Fold Table