Save Quantity; Save Batch - Martin Yale 2051 Installation Operation & Maintenance

Martin Yale 2051 Folder
®
Folder Speed) as part of a custom fold program (see section 5.3 - Custom Fold Programs).
To change this parameter, once you are in edit mode, pressing "+" will set this parameter to "Yes", and
pressing "-" will set this parameter to "No". Once you have set this parameter, press the "ENTER"
button once to save and exit edit mode.
With this parameter set to "Yes", when a Custom Fold Program is stored, the current folder speed will
also be stored. When the Custom Fold Program is recalled, the Folder Speed will be set to the
previously stored Folder Speed.
If this parameter is set to "No", Folder Speed will remain unchanged by Custom Fold Programs.

7.2.4 Save Quantity

This parameter enables or disables saving of a fold Quantity (see section 3.6.1 - Quantity) as part of a
custom fold program (see section 5.3 - Custom Fold Programs).
To change this parameter, once you are in edit mode, pressing "+" will set this parameter to "Yes", and
pressing "-" will set this parameter to "No". Once you have set this parameter, press the "ENTER"
button once to save and exit edit mode.
With this parameter set to "Yes", when a Custom Fold Program is stored, the current fold Quantity
value will also be stored. When the Custom Fold Program is recalled, the fold Quantity will be set to
the previously stored value.
If this parameter is set to "No", fold Quantity will remain unchanged by Custom Fold Programs.

7.2.5 Save Batch

This parameter enables or disables saving of a Batch quantity (see section 3.6.2 - Batch Mode) as part
of a custom fold program (see section 5.3 - Custom Fold Programs).
To change this parameter, once you are in edit mode, pressing "+" will set this parameter to "Yes", and
pressing "-" will set this parameter to "No". Once you have set this parameter, press the "ENTER"
button once to save and exit edit mode.
With this parameter set to "Yes", when a Custom Fold Program is stored, the current Batch quantity
value will also be stored. When the Custom Fold Program is recalled, the Batch quantity will be set to
the previously stored value.
If this parameter is set to "No", Batch quantity will remain unchanged by Custom Fold Programs.
Revision 3.0 Martin Yale Industries, Wabash, Indiana, USA 260-563-0641
(2051.09.03.16.11.40)
Page 17 of 52