Table of Contents
Advertisement
Chapter 1. UNPACKING & POSITIONING THE INTEC LC600
1.1 Contents of the ColorCut LC600 (Overview)
Your Intec ColorCut LC600 is packed in 1
box/crate.
The box/crate contains :
The ColorCut LC600 Cutter (i))
'Dual grip' Front Standard feed roller (iia)
'Dual grip' Front Narrow feed roller (iib)
A USB Wi-fi Dongle (iii)
The Accessories box (iv)
And the ColorCut Pro Software (v)
NOTE: The standard 'Dual Grip' front media
feed roller will be already installed in the
LC600 cutter.
However, the supplemental narrow media
feed roller will be typically placed in the
retractable media feed tray. The narrow 'dual
grip' front feed roller enables users of narrow
label media to achieve consistent feed on
narrow media without creating uneven wear
on the standard 'dual grip' front feed roller.
The USB Wi-Fi dongle is for PC users, that
may not have Wi-Fi capabilities on their PC,
and it enables a Live Preview of the scanning
and cutting process.
The final items found inside the accessories
box, include the power cable and USB cable
plus a disk containing your ColorCut Pro
Software.
A Blade Holder, a selection of
Cutting Blades, a Calibration Pen Tool and a
Creasing Blade.
Item (i) - Intec ColorCut LC600 Cutter
Item (iia) - Standard media feed roller
(Pre-fitted in front of LC600)
Item (iib) - Narrow media feed roller
Item (iii) - USB Wi-fi Dongle
Item (iv) - Manuals, USB & Power Cables
Advertisement
Table of Contents
