How to Edit a Job Memory
Job Memories are presets for your imprint types. Each Job Memory is identified by a
name and a number. The Homescreen displays the name of the current Job Memory.
If your mail requires different settings such as specific postal rate and ERA and/or
slogan and department to charge, then the job memories are the solution: all your
settings are stored in a single memory. Highly recommended for repetitive tasks.
4
Prepare the job that you want to save as job memory (Rate, Slogan, ERA).
Please refer to the following sections to prepare your job:
page 151,
How to Add (or Cancel) a Slogan on the Imprint
Cancel) an ERA on the Imprint
To edit a Job Memory:
1.
From the home screen:
Long press
The job memories list is displayed.
2.
Select the existing job memory old which you want to edit. Press [OK].
The message confirmation to save account info is displayed.
86
• Normal Job Memory: ERA, Slogan, Rate, Account Number
(if any).
• Job Memory are limited to a total of nine.
• Once created a Job Memory cannot be deleted.
• To edit or change a Job Memory, you make the changes
to an existing Job Memory and save the changes under a
different name.
on page 216.
.
How to Select a Rate
on page 226,
How to Add (or
on
Need help?
Do you have a question about the iX-3 and is the answer not in the manual?
Questions and answers
need to add postage
To add postage on the Quadient iX-3:
1. Press the appropriate button to access the menu.
2. Select "Credit" to open the Credit screen.
3. If prompted, enter your PIN code using the keypad and press [OK].
4. Enter the amount of postage to add using the keypad (use C to clear a digit).
5. Press [OK] to connect to the Postal Server.
6. Wait for the system to confirm that the crediting was successful.
This answer is automatically generated