Table of Contents
Advertisement
Positioning the Jack
NEVER work beneath the car with the jack
as the only means of support. The jack is
designed for wheel changing only!
NEVER jack the car using any jacking points
other than the jacking points.
damage to the car could result.
EMERGENCY INFORMATION
Avoid accidental contact with any underbody
parts,
components.
Position the jack on firm level ground under the jacking
point nearest the wheel to be removed. Note that the
domed head of the jack must fit into the corresponding
Serious
recess in the sill plate (There is a triangle indicator in the
area shown by the arrowhead. See the illustration above).
Turning the jack screw by hand, adjust the jack until the jack
head fits snugly onto the sill in the correct area. Ensure that
the base of the jack is in full contact with the level ground.
Fitting the Spare Wheel
Regularly check the spare wheel tyre
pressure, it may not be used for long
periods of time. After fitment, at the first
opportunity check and adjust the tyre
pressure.
The wheel bolts must be tightened to the
specified torque after changing a wheel
(115
especially
hot
exhaust
～ ～ ～
130 Nm).
system
5
233
Advertisement
Table of Contents
