MG ZS Manual page 42

INSTRUMENTS AND CONTROLS
Stability Control System/Traction
Warning Lamp - Yellow
With the ignition switch in the ON position,
this lamp illuminates to conduct a system self-check and
extinguishes upon the completion. If this lamp does not
extinguish or illuminates during driving, it indicates the
system has a failure. Please seek an MG Authorised
Repairer at the earliest opportunity.
If this lamp flashes during driving, it indicates the system is
operating to assist the driver.
Stability Control System/Traction Control OFF
Warning Lamp - Yellow
If the dynamic stability control/traction control
system is switched off manually, this warning lamp will
illuminate.
26
Control ABS Malfunction Indicator Lamp - Yellow
With the ignition switch in the ON position,
this lamp illuminates to conduct a system self-check and
extinguishes upon the completion. If the lamp does not
extinguish, seek an MG Authorised Repairer at the earliest
opportunity.
If an ABS failure occurs while driving, ABS operation will
be suspended, but normal braking will still be available.
Please seek an MG Authorised Repairer at the earliest
opportunity.
Brake System Malfunction Indicator Lamp - Red
With the ignition switch in the ON position,
this lamp illuminates to conduct a system self-check and
extinguishes upon the completion. If this lamp does not
extinguish or illuminates during driving, it indicates a
failure with the braking system such as brake fluid loss,
electronic brake force distribution failure or parking brake
not released.