Removable Tow Bar; Tow Bar Operating Instructions - MG ZS Manual

APPENDIX

Removable Tow Bar

Tow Bar Operating Instructions

Safety:
Operation of the detachable tow bar should only be
performed by hand, never use hand tools to operate the
locking mechanism.
If the trailer is fitted with a security cable or brake cable it
must be attached to the dedicated connection hole in the
fixed part of the tow bar.
When a stabiliser coupling is installed on the trailer never
use grease on the tow ball.
Always remove the detachable tow ball when not in use if
it obscures the registration plate.
Preparation:
Remove tow ball cover.
Ensure the tow ball is clean and free from dirt and debris.
Ensure the tow ball is in the 'spring position' (see picture
3.1).
302
The tow ball is in the spring position if:
• The operating handle is pushed in completely and no
colour indication is shown inside the indication area of
the operating handle.
• The slider is pulled fully towards the tow ball (shown in
picture 3.1).
• It is not possible to lock the system with the supplied
locking keys (see picture 5.2).
The tow ball is NOT in the spring position if:
• The operating handle is popped out and shows a red
field in the indication area of the operating handle (see
picture 3.1)
• The slider is pushed out towards the tow ball (the part
is indicated by in picture 3.1).
• It is possible to lock the system with the supplied keys
(see picture 5.2).
To place the tow ball in the spring position:
• Unlock the tow ball (see picture 6.1)
• Push the operating handle inwards, rotate in a clockwise
direction (whilst pushing inwards) until the handle
remains in position (see picture 3.2). If unsure repeat
operation.