MG ZS Manual page 43

The lamp illuminates when the parking brake is applied and
extinguishes when it is fully released. If the parking brake
is not released, when the vehicle speed exceeds 3 mph
(5 km/h), this warning lamp will flash, accompanied by an
audible warning.
If the lamp remains on after the parking brake has been
released, it indicates that there is a failure in the braking
system. Please seek an MG Authorised Repairer at the
earliest opportunity. Check brake fluid level (refer to
"Brake Fluid Check and Refill" under the "Service and
Maintenance" section). If the lamp remains on, stop the
car as soon as safety permits and seek an MG Authorised
Repairer at the earliest opportunity.
Engine Malfunction Indicator Lamp - Yellow
The indicator lamp is used to indicate any
failure detected by the engine management system which
seriously affects the engine performance. With the ignition
switch in the ON position, this lamp illuminates to conduct
a system self-check and extinguishes upon the completion.
INSTRUMENTS AND CONTROLS
This lamp will illuminate if a failure that may affect the
engine performance occurs during driving. Please seek an
MG Authorised Repairer at the earliest opportunity.
Engine Emission Malfunction Indicator Lamp -
Yellow
The indicator lamp is used to indicate any engine
condition that will effect engine performance or emissions.
With the ignition switch in the ON position, the lamp
illuminates to conduct a system self-check and extinguishes
after the car is started.
If the failure affecting the engine performance and emission
occurs during driving, it will illuminate. Please seek an MG
Authorised Repairer at the earliest opportunity.
Engine Coolant Temperature Warning Lamp -
Red/Blue
When the engine coolant temperature warning
lamp illuminates blue, it indicates the engine coolant
1
27