Head Restraints - MG ZS Manual

Head Restraints

Adjust the height of the head restraint so that
the top of it is in line with the top of the
occupant's head. This location may reduce
the risk of head and neck injuries in the event
of a collision. DO NOT adjust or remove the
head restraints while the car is moving.
DO NOT hang anything on any head restraint
or head restraint rod.
The head restraint is designed to prevent rearward
movement of the head in the event of a collision or
emergency braking, thereby reducing the risk of head and
neck injuries.
SEATS & RESTRAINTS
When adjusting a head restraint from low to high position,
pull the head restraint directly upward, and gently press
it downward after it reaches the desired position to
make sure that it is locked in position. To remove the
head restraint, press and hold the guide sleeve button (as
indicated by the arrow) on the left of the head restraint,
then pull the head restraint upward to remove it.
When adjusting a head restraint from high to low position,
press the guide sleeve button (as indicated by the arrow) on
the left of the head restraint, and press the head restraint
downward; release the button after it reaches the desired
position, and gently press the head restraint downward to
make sure that it is locked in position.
3
125